 |
|
| |
|
Hoff-Hilk Auction Services
QX, Inc. - Wednesday, November 4, 2009 Wednesday, November 18, 2009 – Starting at 10:00am CST
| Item | Description |
| 1. | Kalamazoo Model 20RWF, Vertical Band Saw, 21" x 21" Tilting Table, 19-3/4" Throat, 9-1/2" Maximum Under Blade Guides, Variable Speeds: 190 to 3,600 FPM, Startrite Model BSO-16 Blade Welder, Three Phase Motor and Controls, s/n 61426, Approx: 25" x 55" x 77" and 1,200 Lbs R&R has quoted $50 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 2. | Kurt Model D675, 6" Anglock Machine Vise, S/N 153938 |
| 3. | (36) Assorted ER-20 Collets, With Big Bear Caddy |
| 3A. | Click On This Lot For Live Preview Times For Qx On-Line Auction |
| 3B. | Please click on this lot for Rigging Information. |
| 3C. | UPS Shipping Available for small items Click here for more information. |
| 3D. | This auction features EXTENDED BIDDING! View this lot to learn more. |
| 3E. | How much time is left? |
| 3F. | This auction STARTS TO CLOSE at 10:00 AM CDT at a rate of 5 lots per minute. Click this lot to learn more. |
| 3G. | Click on This Lot For Important Removal Information |
| 4. | (9) Assorted Insert type solid carbide boring bars with shanks between 5/8" and 1" |
| 5. | Techniks model CAT 40XFMA 3/4"-1.37", CAT-40 Shell mill tool holder with Valinite 2" insert shell mill |
| 6. | Height Gage, 12" Capacity, .001", Counting Type |
| 7. | Kitagawa model B-206, 6 1/2" power chuck, 3-jaw, 6,000 max rpm |
| 8. | 24- Place tool holder rack for 40 taper tool holders |
| 9. | (3) Sections of pallet racking including, (4) Uprights, 41 1/2" wide x 168" tall and (12) 96" cross member, with wire decking |
| 10. | Gardner Denver Model ECHSJF, Screw Type Air Compressor, Water Cooled, 100 HP, Three Phase Motor and Controls, s/n M268871780, Approx: 82" x 56" x 58" and 5,500 Lbs R&R has quoted $100 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 11. | (3) Sections of pallet racking including, (4) Uprights, 41 1/2" wide x 168" tall and (12) 96" cross member, with wire decking |
| 12. | Kurt Model D675, 6" Anglock Machine Vise, S/N 178870 |
| 13. | (3) Assorted straight shank collet holders, including; (2) Hertel model HSSO75ER11600, With 3/4" shank and (1) Model S-ER16-07-60H-V with 3/4" shank and (4) Assorted ER-11 and ER-16 Collets |
| 14. | Rigid Model 300, electric Pipe threaders, 1/8" to 2" pipe capacity, cutter and deburring arms, Forward and reverse, on tripod, single phase, SN 753986 |
| 15. | Acme Type Transfer Ladle, Approx 1,000 Lb Capacity, Barrel Type, 30" Diameter x 38" Long, Approx: 7" x 12" Opening, Powered Tipping, Single Phase Tipping Motor, s/n na, Approx: 53" x 48" x 47" and 1,500 Lbs |
| 16. | 72- Compartment fastener cabinet including contents of over (1000) Assorted SHCS, Standard and metric approx: 33 3/4" x 12" x 42 1/4" |
| 17. | Picture frame sprayer head for reciprocator, with 18- existing sprayers, approx 34"x24" |
| 18. | Ballymore portable safety stairs, 60" top step height, 24" wide steps |
| 19. | Collapsible wire basket including contents of assorted ladles cups, hand ladles, stirring sticks and more, Ladle cups up to approx 12lb shot |
| 20. | Wilson Model 37CT-18, Hydraulic Trim Press, 18-Ton Rated Capacity, 19" x 31-3/4" Bed, Gap Bed, 17" x 8" Hole Thru Bed, 2" Thick Bed, Palm Buttons, Three Phase Motor and Controls, s/n 2358, Approx: 50" x 48" x 102" R&R has quoted $200 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 21. | (6) Assorted collapsible wire baskets, all approx 48"x40"x36" |
| 22. | (4) Filter kidney type fluid pump, 3/4hp single phase motor, 1" ID hoses, pressure gage, on 2-wheel cart |
| 23. | Huot 4-drawer drill cabinet, 26"x12"x12 1/2" including contents of over (100) Assorted fractional, number, and letter drills |
| 24. | Self-dumping hopper with forklift sleeves, overall approx 46"x70"47" |
| 25. | Hotsy Model 980A, Heated Pressure Washer, 4 GPM Capacity, 240 GPH Capacity, 2,000 Maximum PSI, Oil Powered at a rate of 2.75 GPH, 385,000 BTU, Adjustable Temperature Controls, Wand, Hoses, 5 HP, 230-Volt Single Phase, on Cart, s/n H304540295, Approx: 66" x 34" x 53" |
| 26. | 2-Wheel hand truck |
| 27. | TPI 21" Pedestal shop fan, single phase |
| 28. | Husky Model 01-41200-00, 12' Fiberglass step ladder, 300lb capacity |
| 29. | Sterlco model F6016-DX, Single zone oil control unit, 24,00 watt heater, Sterlco Series 400 temperature controls, vacuum gage, three phase motor and controls, SN 46823, approx 24"x 46"x60" |
| 30. | Denison Multipress Model RO65LC261D266C218A59S220, C-Frame Hydraulic Press, 6-Ton Rated Capacity, 17-1/4" x 12" Table, Approx: 5" x 9-1/2" Hole Thru Table, 6" Throat, 16" Maximum Daylight, 2-3/4" Cylinder Bore, 2" Ram Diameter, Palm Controls, Ejectomat Model 60, 5 HP, Three Phase Motor and Controls, s/n 20574, Approx: 33" x 40" x 77" R&R has quoted $100 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 31. | Rockwell model 15-660, single spindle Drill Press, 14"x10" plain production table, 7 1/2" throat, table elevation mechanism, 6-belted speeds, Procunier No. 2tapping attachment, 1/2hp, Three Phase, SN 1376819, on casters, approx 24"x28"x69" |
| 32. | Wissota model E-8, double end pedestal grinder, 8" maximum wheel capacity, 3450 rpm, 3/4hp, three phase motor and controls, SN W8-79 |
| 33. | Approx (19) Assorted solid carbide form cutters and other milling cutters with shanks up to 3/4" |
| 34. | (13) Assorted DA-18 Series Collets |
| 35. | (2) Kennametal model SS100TCL769, Straight Shank floating tap holders, 1" shank with 8- assorted tap collets |
| 36. | (4) New Steel Vise Jaws for 6" machine vise, approx 6"x2"x2" |
| 37. | Approx (20) Assorted large threading taps up to approx; 1 3/4"- 20" with 2-drawer metal cabinet |
| 38. | (2) Sections of medium duty shelving including: (3) 30"x72" uprights, (6) 72" cross members, (6) 48" cross members, with wood decking |
| 39. | 6" Heavy- duty swivel base bench vise |
| 40. | Linde Model HeliArc, Tig Welding Supply, Rated Output @ 40% Duty Cycle: 250 Amp, 30 Volt, 72 Maximum OCV, Adjustable Current Controls, Ground Clamp, Tig Torch, Bernard Welding Chiller, Foot Pedal, Single Phase, s/n B87G, Approx: 50" x 21" x 52" R&R has quoted $50 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 41. | AeroSpace 0 to 12" Digital Height Gage, 0.01mm / 0.001" |
| 42. | (3) Assorted Pin Gage Sets, Including: (1) M-1, .061" to .250", (1) .015" to 1.0" (Partial) and (1) .251" to .500" (Partial) |
| 43. | DoAll Gage Block Set, with Sizes Between 0.050" to 4.0" |
| 44. | SPI Dial Indicator, 2" Range, .001" |
| 45. | Federal Model C2IC, Dial Bore Gage, .0001" |
| 46. | (2) Assorted OD Micrometers, Including: (1) 0-1" Blade Type, .0001" and (1) VIS 1-2" (Needs Repair) |
| 47. | Assorted Repairable Inspection Gages, Including: (1) 6" Vernier Caliper, Starrett Dial Indicator, and (4) Other Dial Indicator |
| 48. | Fowler Gage Block Set, Nearly Complete |
| 49. | (3) Assorted Dial Indicators, Including: (1) Mitutoyo Model 1DC-1012E, Digital Indicator, 1/2" Range, .0005", (1) SPI Dial Indicator, .0005", (1) Dial Indicator, 1" Range, .001", with Other Gage Parts |
| 50. | Buhler Model H-800B, Version 5, Cold Chamber Aluminum Die Casting Machine, 800 Metric Ton Rated Capacity, 55.51" x 64.56" Fixed Die Platen, 55.51" x 55.51" Moving Die Platen, 35.43" x 35.43" Between Tie Bars, 7.06" Diameter of Tie Bars, 12.99" Minimum Die Height, 41.33" Maximum Die Height, 35.43" Stroke of Moving Die Platen, (1) Automatic Tie Bar Pull, (3) Core Machine, Approx: 7 m/s Injection Speed, Mechanical Multiplier, (3) Core Machine, Buhler Datacess Controls, Approx 85 HP, Three Phase Motor and Controls, s/n 10212097, Approx: 92,000 Lbs and 37' 2" x 8' 11" x 12' 5", New in 1992 R&R has quoted $4,500 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 51. | Assorted Inspection Equipment Including: (1) Scherr-Tumico "Grammes" 0 to 250 Gram Force Gage, (1) Starrett Dial Depth Gage, .001", and (1) .001" Depth Gage, Includes Assorted Indicator Parts and Posts |
| 52. | Starrett No. 254, 20" Height Gage |
| 53. | WestOver Model RHB-10ATC, Hand Refractometer |
| 54. | (2) Assorted Vernier Calipers, Including: (1) Mitutoyo 8" and (1) 6" |
| 55. | J&L Precision V-Blocks abd Clamp Set with 2-Extra Clamps and (1) Extra V-Block |
| 56. | Tru-Stone grey granite surface plate, no lip, 36"x36"x6", with metal stand |
| 57. | Suburban precision angle plate 6"x8"x6" |
| 58. | Mitutoyo precision 10" Vernier height gage stand |
| 59. | Starrett Model 258R, Precision 10" riser |
| 60. | Kozma Holding Furnace, Approx: 600 Lb Capacity, 24" Diameter x 20" Deep Tapered Crucible, 5" Diameter Lower Crucible Chute, Gas Fired, Delta T Systems Digital Teperature Controls, s/n na, Approx: 84" x 53" x 58" R&R has quoted $150 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 61. | 2-Wheel gas tank cart |
| 62. | Invincible 4- drawer metal file cabinet, approx 15"x28"x52" |
| 63. | 2- Door metal cabinet with 5 adjustable shelves, approx 36"x18"x78", Contents Not Included |
| 64. | Indicator stand with precision ground table, approx 9"x8" with 1 1/2" indicator post |
| 65. | (2) Custom inspection fixtures, approx 12"x8"x1 1/2" with 4-holes thru fixture |
| 66. | Slotted Angle plate with custom steel fixtures, approx 8"x4 7/8"x6" |
| 67. | Black Granite surface plate, no lip, 24 3/8"x18 1/8"x3 1/8" with metal stand |
| 68. | (2) Custom inspection fixtures, approx 12"x8"x1 1/2" with 4-holes thru fixture |
| 69. | (4) Metal shelves with 4 shelves approx 36"x15 1/4"x71", ( Contents Not Included ) |
| 70. | Clearing Machine Hydraulic Trim Press, 35-Ton Rated Capacity, 28" x 41" Bed, Gap Bed, 10" x 9-3/4" Hole Thru Bed, 2-1/2" Steel Bolster Plate, Palm Controls, 20 HP, Three Phase Motor and Controls, s/n na, Approx: 48" x 96" x 148" R&R has quoted $400 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 71. | (11) Assorted Ringmaster, Master Ring Gages with sizes between .6250" and 1.6875" |
| 72. | 6" Dial Caliper, .001" |
| 73. | Mitutoyo model 510-133, 2" to 3" indicating micrometer, .00005" with standard |
| 74. | Aerospace dial indicator, .005" |
| 75. | RimRock Type Recipricator, Approx 96" Reach, 25" x 21" Picture Frame Spray Head with 14-Sprayers, Approx: 42" x 37" x 61" |
| 76. | Mitutoyo 12" Vernier Caliper |
| 77. | Mitutoyo model 543-135 Digital indicator, .0005" / .01mm, 1/2" range |
| 78. | Barber- Coleman "Impresser" Portable dial hardness tester |
| 79. | SPI Model 10-872-0, 1" to 2" Digital OD Micrometer, .00005" |
| 80. | Rimrock Model 305, Multi-Link Ladler, 40" to 70" Reach, 50 Lb Maximum Shot Size Capacity, Pedestal Mount with RimRock Remote Ladler Controls, s/n na, Approx: 2' x 4' x 9' 8" R&R has quoted $100 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 81. | SPI Internal hole gage, 0.350" to 0.425" range, .0001" |
| 82. | Mahr type indicating micrometer, 1"-2" range |
| 83. | 2" to 3" Outside Blade Micrometer, .0001" |
| 84. | Etalon 1" to 2" Outside Micrometer |
| 85. | RimRock Model 195-3601-BO, Automatic Extractor, 60" Stroke, 40 Lb Working Capacity, 500 PSI Hydraulic Working Pressure, Hydraulic Tank and Pump, s/n 2713, New 1982, Approx: 88" x 48" x 82" and 4,000 Lbs |
| 86. | (4) Assorted OD Micrometers including: (1) B&S 0-1", (1) Scherr- Tumico 1-2" Blade, (1) Lufkin 3-4", and (1) Starrett 4-5" |
| 87. | VIS Precision Protractor |
| 88. | Dial Indicator, .0005" |
| 89. | Brown & Sharpe model 7034-3, "Bestest" dial indicator, .0005" |
| 90. | Kozma Type Holding Furnace, Approx: 600 Lb Capacity, Gas Fired, 31" Diameter x 26" Deep Tapered Crucible, 4" Diameter Lower Crucible Chute, 3 HP Blower Motor, Three Phase Motor and Controls, s/n na, Approx: 84" x 90" x 62" R&R has quoted $150 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 91. | (5) Drilled and tapped 1-2-3 Blocks |
| 92. | Dial Indicator block with magnetic base, 0 to 0.1" range, .001" with 1" diameter platen |
| 93. | SPI Internal Hole Gage, 1.0" to 1.2 capacity |
| 94. | Adjustable indicator stand with 15 3/4" indicator post |
| 95. | Etalon 0-1" indicating micrometer, point type, .00005" |
| 96. | Starrett model 701, Internal groove micrometer with custom anvils |
| 97. | SPI Internal Dial Caliper, 3.25" to 4.25" range, .001" |
| 98. | Tru-Stone Grade B, Grey Granite Surface Plate, no lip, 12 5/8"x12"x3", SN 12996 |
| 99. | Vermont Gage Series A Gage Pins, Minus, .011" to .060", partial set |
| 100. | Lester Model HP6-XSF, 600-Ton Cold Chamber Aluminum Die Casting Machine, Solid Frame Type, 41-1/2" x 47-1/2" Moving Platen, (2) Toggle Type, Olmsted Prefill Intesification, (1) Hydraulic Core, Central Lubrication, Hydraulic Ejection, 40-HP, Three Phase Motor and Controls, s/n na, Approx: 37' 2" x 8' 11" x 12' 5" R&R has quoted $1,000 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 101. | SPI Internal Hole Gage, .65" to .80" range |
| 102. | (4) Assorted repairable dial indicators, some Brown & Sharpe |
| 103. | (2) Assorted Dial Indicators including, (1) SPI 24-401-2, .0001" and (1) Federal T-6, .001" |
| 104. | (2) Assorted SPI internal hole gages including, (1) 1.0" to 1.2" range and (1) 2.8" to 3.2" range |
| 105. | (10) Assorted Thread gages, primarily Go-No/Go up to approx 1.9350 |
| 106. | Model Mo- Minus gage pin set 0.11" to 0.60" |
| 107. | Over (35) Assorted Deltronic and Vermont gages, gage pins up to approx .725" |
| 108. | (4) Assorted Comtorgage dial gages including, (2) Model CM2, .0001", (1) CM1, .00005" and (1) Parts Gage |
| 109. | Mitutoyo model 2802-10, Dial bore gage with 8-Assorted anvils, .44" to .72" range, .0001" |
| 110. | Johnston Holding Furnace, Approx: 600 Lb Capacity, 24" Diameter x 20" Deep Tapered Crucible, CAL 9900 Digital Tremperature Controls, s/n na Approx: 7' x 5' 10" x 3' 8" R&R has quoted $150 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 111. | (4) assorted Leitech Go/ No-Go thread gages including, (1) M8X1-6H, (1) M8x 1.25-6H, (2) 5/16-18UNC |
| 112. | (4) Assorted gage sets including, (1) Craftsman Radius Gage Set, (2) Precision Devices, Roughness gages, and (1) Precision Brand partial feeler gage set |
| 113. | Fowler Model Indi-X, Digital indicator, 0-1" range, .0005", interface port |
| 114. | Assorted Inspection Equipment including (1) Fowler 8" dial caliper, .0001" and (1) Fowler dial indicator, .0005" |
| 115. | Starrett model 385, 72" Precision Straight Edge 3 1/8" wide |
| 116. | Starrett Model 380 Precision straight edge, 36" long 2 3/8" wide |
| 117. | (15) Assorted ring gages with sizes between 2.00465" and 3.091" |
| 118. | (14) Assorted Ringmaster and ringmaster type setting rings with sizes between .5000" and 2.000" |
| 119. | (18) Assorted Ring Gages and Thread ring gages up to 1.3762" and 1 3/16" -20 UN |
| 120. | Clearing Type Hydraulic Trim Press, 36" x 26" Bed, 29" x 19" Between Tie Bars, 3-1/2" Diamter Ram, 18" x 11-3/4" Hole Thru Bed, Marathon Motor, Three Phase Motor and Controls, s/n na, Approx: 3' 9" x 3' 9" x 8' 6" R&R has quoted $200 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 121. | (4) Assorted OD Micrometers including, (1) Lufkin 1-2", (1) Accupro 3-4", blade type, (1) Scherr-Tumico 4-5", blade type and (1) Lufkin 5-6" |
| 122. | Mitutoyo internal bore gage with 6-anvils .30" to .40" range, Please Note: missing dial indicator |
| 123. | Tru-Stone Gray Granite surface plate, no lip, 12"x12"x4 1/8" |
| 124. | (2) Custom inspection fixtures, approx 12"x8"x1 1/2" with 4-holes thru fixture |
| 125. | Warick Duel Fuel Tilting Furnace, 16,000 Lb Aluminum Capacity, Metal Charge Well, Shim Door, Approx 65" Wide Bath, Hydraulic Tilt, Honeywell Digital Controls, s/n 916, Approx: 20' x 12' x 12-1/2' R&R has quoted $2,000 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 126. | Dip Seal Plastics model WP4A-19-1, melting pot, single phase |
| 127. | Precision devices model PDA-12, "Digital Surfometer" Digital Display, touch pad controls, SN 4029-D with Precision Devices PDD-6, Probe holder unit with PDK-2-1914 probe, SN 5028-D |
| 128. | Zero Spindle Model AD-014, For OD Part inspection, graduated spindle with (2) Assorted collets including, 1 3/4" to 1 7/8" and 1 1/2" to 1 5/8" |
| 129. | Assorted inspection items including, (1) Tacro point type caliper, 12" capacity, (1) Micrometer holder, (1) Halda 1000 Gram capacity tension gage, and (1) Partial depth gage set with 5 anvils and no micrometer |
| 130. | Rimrock Model 305, Multi-Link Ladler, 40" to 70" Reach, 50 Lb Maximum Shot Size Capacity, Pedestal Mount with RimRock Remote Ladler Controls, s/n MLL-1094, New 1993, Approx: 3' 11" x 1' 4" x 12' 11" on stand R&R has quoted $100 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 131. | Mahr digital indicator type inspection gage, .0001" |
| 132. | Tru-Stone gray granite surface plate, no lip, Grade A, 18"x12"x4" |
| 133. | Tru-Stone gray granite surface plate, no lip, grade B, Partially damaged 24"x18"x3" with metal cart |
| 134. | (2) Plastic Parts bin organizers, Bench top type, including contents which may include but not limited to, Go/No-Go gage holders, ball bearings, gage pins, fasteners and more |
| 135. | Swivel Base Machine Mount Recipricator, 48" Vertical Movement of Sprayers, Pneumatically Powered, 50" Pivot Center, s/n na, Approx: 2' 2" x 4' 5" x 5' 4" |
| 136. | (2) Assorted custom inspection fixtures including (1) Pneumatic and (1) Arrowhead tool & design |
| 137. | Cabinet base bench with 6-drawers and 2 cabinets, wood construction, approx 97"x38"x35 1/2" |
| 138. | Indicator stand on gray granite surface plate, no lip, 12"x8"x2" with 12" indicator post |
| 139. | Over (50) Assorted Standard/ metric thread go/ no go gages up to approx 3/8" |
| 140. | Cal-Miser Model 27001691919S88SS, Gas Fired Holding Furnace, 60" x 47" x 22" Outside Dimensions of Bath, 12" x 20" Ladler Bath, West 4100 Digital Temperature Controls, s/n na, Approx: 96" x 60" x 82" R&R has quoted $150 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 141. | Over (40) Assorted Thread gages, primarily standard threads up to approx, 1 1/2"- 11.5 NPTF-L3 |
| 142. | Approx (22) Assorted Go/ No Go plug gages up to approx 46.71mm, both standard and metric |
| 143. | Over (50) Assorted Go/ No Go plug gages up to approx 5/8" |
| 144. | Over (50) Assorted Plug gages, Vermont, Deltronic, and other up to over 1" |
| 145. | Cast Air Recipricating Type Air Compressor, 5 HP, Approx: 22 CFM, 80-Gallon Vertical Receiver Tank, Pressure Guage, Three Phase Motor and Controls, s/n na, Approx: 40" x 34" x 76" and 500 Lbs |
| 146. | Approx (20) Assorted Primarily Vermont thread gages, with assorted handles, keepers, and more |
| 147. | Assorted Inspection Equipment including, Set Of (3) jack with extra pads, Starrett telescoping gages, granite surface plate for indicator post, 6"x6"x2", Proto torque wrench, 0-250 in/ lb capacity, precision V-Block, peak light scale lupe with out lens, and partial parallel set |
| 148. | (5) Assorted Indicators Including, (1) Mitutoyo 2805-10, bore gage with (1) Anvil, .0001", (1) Comtorgage model CM2, .0001", (1) Federal C 1/2 K-H, .00005", Starrett 655-441, .0005" on depth gage anvil with assorted tips for indicators |
| 149. | (2) Assorted Starrett inspection items including, (1) Starrett model 701 internal groove gage with custom anvils and (1) model 711-F dial Indicator, .001" |
| 150. | Prince 600-Ton Cold Chamber Aluminum Die Casting Machine, 51" x 53" Platen, 29-1/4" x 29-1/4" Tie Bars, 6-3/4" Tie Bar Diameter, 4-Toggle Type, 52-1/4" Total Daylight, 4" Ejection Stroke, 3,000 PSI Acummulator Intensifyer, Central Ejection with Bumper Plate, Central Lubrication, Eaton Digital Controls Retrofit to Original Control Box, 75HP, Three Phase Motor and Controls, s/n 77017, Approx: 70,000 Lbs, Machine: 37' 2" x 12' 5" x 8' 11", Control Box: 113" x 18" x 86"New 1977 R&R has quoted $1,750 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 151. | Stutervant model TCF-100-I, Torque checking fixture, 0-25 in. lb capacity |
| 152. | Federal Model E2B, Dial indicator, .00005", on stand with 2" diameter platen |
| 153. | Bench Center, 13" maximum between centers 2" center height with (2) Mahr millimess indicators, .0005" |
| 154. | Custom Inspection Fixture with Mahr Millimess indicator, .00005", square and assorted gage blocks |
| 155. | (2) Assorted amplifiers for electronic indicators including, (1) Brown & Sharpe model 991 and (1) Bendix BXT |
| 156. | Depth type gage set with tubular micrometer head, 10-anvils from 1" to 10" |
| 157. | Suburban model PAW060606. Precision angle plate, 6"x6"x6" |
| 158. | (3) Assorted indicator stands, (1) Brown & Sharpe and (2) meg based stands, and (3) Other |
| 159. | Shamrock model D, Tie Bar strain gage, with Sayinomiya indicator, .25" range .0001" |
| 160. | Hydraulic Trim Press, 41-1/4" x 29" Bed, 8" x 5" Hole Thru Bed, 31-1/2" x 19-1/2" Between Tie Bars, Approx 5-1/2" Diameter Ram, On Metal Stand, 20 HP, Three Phase Motor and Controls, s/n na, Approx: 67" x 60" x 128" R&R has quoted $200 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 161. | Double Sided inspection room bench with 4-adjustable shelves, approx, 72"x36"x30" |
| 162. | Hamelton Drafting table 60"x37" drafting top, adjustable height, angle, with desk attached with 3 drawers |
| 163. | (2) 2-door metal cabinets including (1) 36"x18"x42" with 2 adjustable shelves and (1) 39"x21 1/2"x29" with 1- stationary shelf on casters |
| 164. | Double pedestal metal desk with 6 drawers, approx 60"x30"x29" |
| 165. | (4) Assorted metal file cabinets, (1) 4- drawer 15"x25"x52", (1) 4-drawer 15"x28 1/2"x52 1/4" and (2) 2-drawer 15"x28 1/2"x29" |
| 166. | (2) Globe- Wernike 5-drawer metal file cabinets, approx 15"x27 1/2"x57 1/2" |
| 167. | Assorted office furniture including, (1) 2 drawer file cabinet and (1) 9-drawer cabinet, 35"x22"x29 1/2" |
| 168. | Metal office desk with 6 drawers and top hutch, approx 60"x34"x30 1/2", Contents Not Included |
| 169. | Cintas Wall Mount First Aid Cabinet, Including Contents and Blood Borne Pathogens Kit, Approx: 19-1/4" x 6-3/4" x 28-1/2" |
| 170. | Cal-Miser Model 270016S1919S8899, Gas Fired Holding Furnace, Approx 31" x 36" x 12" Bath Dimensions, West 4100 Digital Temperature Controls, s/n S1, Approx: 48" x 90" x 79" R&R has quoted $150 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 171. | (2) Custom inspection fixtures, approx 12"x8"x1 1/2" with 4-holes thru fixture |
| 172. | Indicator stand with precision ground table, approx 9"x8" with 11-1/2" indicator post |
| 173. | Delta Model SA180, 8" Disc Sander, 10" x 4" Tilting Table Bench Top Type, 1/3 HP, 1,720 RPM, Single Phase |
| 174. | Wilton Model 55, Bench Top Pipe Clamp, Approx: 6" Maximum Workpiece Height |
| 175. | Swivel Base Machine Mount Recipricator, 36" Vertical Movement of Sprayers, Pneumatically Powered, 53" Pivot Center, s/n na |
| 176. | Heavy Duty Roller Welding Shop Cart, 49" x 30" x 1/8" Steel Top, 36" Tall |
| 177. | Ridgid Pipe Threading Kit, Including: 00-R, 0-R, and 12-R Die Holders with Assorted Die Holders and Insert Holders |
| 178. | OTC Model B, No. HT75, In-Line Hydraulic Tester, Measures: Flow, Temperature, and Pressure, GPM and Pressure Guages |
| 179. | (8) Boxes of Assorted Welding Rod, Some Partial Boxes, Including But Not Limited To: Hobart E7018H8, E7014, E6013, E6011, JW Harris 15FC 1/16" and More |
| 180. | Norgren Type Compressed Air Dryer, Pressure Guages, 1/2 HP, s/n na R&R has quoted $50 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 181. | Lot of Assorted Port-a-Power Equipment, Including But Not Limited To: Enerpac 16" Pump, Big Red 12" Pump, 50-Ton Hydraulic Ram and More Attachment as Shown |
| 182. | Fisher Controls Type S202H, Regulator Type Unit, 1-2 PSIG, 1/2" Port Size, NEW |
| 183. | BUX Model L2PP, Mag Base Drill, 6" Diameter Magnetic Base, 13/16" Capacity Drill Chuck, Single Phase |
| 184. | Heavy-Duty Steel Work Bench/Welding Table, 74" x 43-3/4" x 1/8" Steel Top, 33" Tall |
| 185. | (2) Aro Diaphram Pumps |
| 186. | Metal Shelf with 6-Shelves, Approx: 36" x 12" x 85", Including Contents of Assorted Items Including But Not Limited To: Melles Griot Laser, Plunger Tip, Switches, Door Skates, Baldor Digital Speed Control Units, Honeywell Gas Valve, and More |
| 187. | Metal Shelf with 6-Shelves, Approx: 36" x 12" x 85", Including Contents of Assorted Items Including But Not Limited To: Die Cast Machine Parts, Gas Regulator, Chains Wire, Filters and More |
| 188. | Metal Shelf with 5-Shelves, Approx: 36" x 12" x 85", Including Assorted Items, Including But Not Limited To: Hydraulic Oil, Brake Fluid, CLR, Spray Paint, Alcohol, and More |
| 189. | Dayton Model 6K405C, Wall Mount 24" Shop Fan, Single Phase |
| 190. | Rimrock Model 305, Multi-Link Ladler, 40" to 70" Reach, 50 Lb Maximum Shot Size Capacity, Pedestal Mount with RimRock Remote Ladler Controls, s/n MLL-1104, New 1993 R&R has quoted $100 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 191. | Metal Shelf with 8-Shelves, Approx: 36" x 12" x 84", Including Contents of Assorted Electrical Items, Including But Not Limited To: Wire, 19.2 Volt Cordless Batteries, Plug Ends (male and female), Transformers, Programmable Controllers, and More |
| 192. | Steel Flatbed Push Cart, 24" x 48" Steel Deck |
| 193. | Metal Shelf with 11-Shelves, Approx: 36" x 12" x 75", Including Assorted Electrical Items, Including But Not Limited To: Relays, Switches, Terminals, Honeywell Digital Controllers, Timers, and More |
| 194. | Wooden Parts Cabinet, Approx: 69" x 11" x 70", With Contents, Including But Not Limited To: Fill-Rite Fluid Meter, Relays, Empty Electrical Boxes, Fittings, Plastic Bins and More |
| 195. | (5) Assorted MTS TempoSonics LP, Electronic Scales, Including: (4) 37-1/2" Long and (1) 47" Long |
| 196. | Wooden Shop WorkBench with Hutch, and 1-Lower Drawer, Approx: 70-1/2" x 30" x 45" |
| 197. | (2) Racks of Hundreds of Assorted O-Rings with Sizes Between 006 and 348 |
| 198. | (2) Large Machine Electrical Cabinets with Shelves, 2-Door, Appear to be Welded Together, Total Dimensions Approx: 140" x 22" x 84" |
| 199. | Old Machine Electrical Cabinet with 5-Shelves, 2-Doors, Approx: 48" x 18" x 72" |
| 200. | Lester Model HP3XSF, 400-Ton Cold Chamber Aluminum Die Casting Machine, Solid Frame Type, 39-3/4" x 24-7/8" Moving Platen, 2-Toggle Machine, (2) Hydraulic Cores, Central Lubrication, Hydraulic Ejection, ACV Prefill Intensification, s/n 37CT-18 R&R has quoted $750 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 201. | Craftsman 2-Drawer Rolling Toolbox, Including Contents of Assorted Hand Tools, Including But Not Limited To: Trouble Light, Files, Clamps, Square, Tube Bender, Hone, and More |
| 202. | Lot of Assorted Tools, Including: (2) Pick Axes, Pipe Bender, and Partial Pipe Wrench |
| 203. | (6) Tubes of WeldMark Model LFBFC, Flux Coated Low Fuming Bronze Welding Rods, Some Partial |
| 204. | (2) Metal Shop Made Racks, Approx: 34" Wide x 66" Tall with Assorted Chains |
| 205. | Tiocco Portable Kidney Type Filter Pump, with Dual Filters, Single Phase Motor, Gages, and Hoses |
| 206. | (1) Section of Pallet Racking, Including: (2) Uprights, 42" Wide x 84" Tall, (4) 72" Cross Members and Welded in Dividers |
| 207. | Pallet of Assorted Benchmark Cart Kits |
| 208. | Pallet of Assorted Flat and V-Type Belts |
| 209. | Nutting Type Flatbed Push Cart, 27" x 54" Bed, Contents Not Included |
| 210. | Gardner No. 3 Double End Pedestal Buffer, Approx: 1-3/4" Diameter Arbor, Approx 7-1/2 HP, s/n na, Approx: 64" x 36" x 52" R&R has quoted $50 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 211. | Pallet of Assorted Fasteners, Including But Not Limited To: SHCS, Hex Bolts, Red Head Concrete Anchors, and More |
| 212. | Pallet of Hundres and Hundreds of Assorted O-Rings |
| 213. | Over (9) Assorted Grease Guns, Including (1) Pneumatic Type and New Hoses |
| 214. | Lot of Assorted Material Handling Equipment, Including: Scissor Type Lifter, Simplex 2X8 20-Ton Jack, Telo-Post Adjustable Floor Jack, 2-Ton Capacity, (2) Nolti-Lift 650 Lb Capacity Lifters, and Box of 2" x 6" Casters |
| 215. | Self Dumping Hopper, Fork Lift Sleeves, Approx Overall Dimensions: 57" x 65" x 47" |
| 216. | 40" Floor Type Shop Fan, 1HP, Single Phase, Please Note: Needs Repair |
| 217. | Shop Made Die Lifting Fixture, Will Open to Approx: 60", 24-1/2" From Beam to Lifting Fingers, with Porta-Power and Cylinder |
| 218. | Pallet of (3) Assorted Cylinders, up to 20" Long, Blower Fan, (2) Small Servos, and More |
| 219. | Dake Type Arbor Press, 6-1/2" Thraot to Center of Ram, 7-1/2" Diameter Table, Approx: 2-Ton Capacity |
| 220. | Denison MultiPress Model FWSO87MC261A259, C-Frame Hydraulic Press, 26" x 14" Bed, 5" x 9-1/2" Hole Thru Bed, 7" Throat, 2" Diameter Ram, Palm Buttons, Limit Switches, Counter, 10 HP, Three Phase Motor and Controls, s/n 25358, Approx: 42" x 53" x 78" R&R has quoted $100 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 221. | Heavy-Duty Rolling Shop/Welding Bench, 48" 48" x 3/8" Steel Top, 32-1/2" Tall |
| 222. | Double End Pedestal Grinder, Approx 6" Diameter Wheel Capacity, Tilting Utility Tables, Single Phase |
| 223. | Machine Electrical Cabinet with 5-Shelves, 2-Doors, Approx: 48-1/2" x 18" x 73" |
| 224. | Acme-Aro Type Transfer Ladle, Currently Under Repair, 30" Diameter x 38" Long Bath, Carrier, No Motor |
| 225. | Warick Model WBT-33, Dual Fuel Tilting Barrel Furnace, 5,100 Lb Aluminum Capacity, Metal Charge Well, Shim Door, Hydraulic Tilt, Approx 33" Diameter Bath, Cal 9000 and Honeywell Digital Controls, Three Phase Motor and Controls, s/n 9180, Approx: 164" x 120" x 120" R&R has quoted $1,500 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 226. | Heavy-Duty Forklift Mast Rack, 42" Between Mounting Posts, 47" High |
| 227. | Holding Table for Molten Material with 9-Swivel Baths, 29" x 5" x 3-1/2" Bath Size, Overall Dimensions Approx: 80" x 42" x 43" |
| 228. | (5) Assorted High Temperature Safety Jackets |
| 229. | Trangle Engineering 40" Floor Type Shop Fan, Single Phase |
| 230. | Hotsy Model 285VI, Parts Washer, 18" Diameter Basket, 33 PSI, 16 Gallons per Minute, 3/4 HP, Single Phase, s/n M1627, Approx: 29" x 32" x 58" R&R has quoted $50 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 231. | (2) Sections of Pallet Type Racking, Including: (3) Uprights: 17" Wide x 72" Tall, (6) 66-34" Crossmembers, and (6) 57" Long Crossmembers |
| 231A. | Delta Cooling Tower, Plastic Construction, 76" Diameter Top, 60" Diameter Base, 93" Tall, 3" and 4" Inlet/Outlets, on Steel Platform Approx: 110" x 80" x 8" |
| 232. | (4) Sections of Pallet Racking, Including: (5) Uprights, 17" Wide x 72" Tall, (4) 68" Long Crossmembers, (6) 54" Long Crossmembers, (4) 100" Crossmembers, and (8) 57" Long Cross Members |
| 233. | (1) Section of Pallet Type Racking, Including: (2) Uprights, 17" Wide x 72" Tall, (4) 96" Long Crossmembers, and Wood Decking |
| 234. | (2) Sections of Pallet Racking Including: (2) Uprights, 42" Wide x 144" Tall, (1) Upright, 42" Wide x 108" Tall, and (8) 96" Long Crossmembers, some are Welded Together |
| 235. | Swivel Base Machine Mount Recipricator, 35" Vertical Movement of Sprayers, Pneumatically Powered, s/n na |
| 236. | (6) Assorted collapsible wire baskets, all approx 48"x40"x36" |
| 237. | (6) Assorted collapsible wire baskets, all approx 48"x40"x36" |
| 238. | (6) Assorted collapsible wire baskets, all approx 48"x40"x36" |
| 239. | (6) Assorted collapsible wire baskets, all approx 48"x40"x36" |
| 240. | Cal-Miser Series S, High Efficiency Holding Furnace, Approx: 42" x 36" x 16" Bath, 21" x 18" x 14" Ladle Bath, West 4100+ Digital Temperature Controls, Gas Fired, s/n na R&R has quoted $150 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 241. | (6) Assorted collapsible wire baskets, all approx 48"x40"x36" |
| 242. | (6) Assorted collapsible wire baskets, all approx 48"x40"x36" |
| 243. | (3) Sections of Pallet Racking, Including: (4) Uprights, 42" Wide x 120" Tall and (12) 72" Long Crossmembers |
| 244. | (2) Sections of Pallet Racking Including, (2) Uprights, 42" Wide x 120" Tall and (12) 72" Crossmembers |
| 245. | Sterlco Model F6016-BX, Single Zone Oil Temperature Control Unit, 24,000 Watt Heater, Sterlco 400 Series Controls, 1 HP, On Casters, Three Phase, s/n 72107 |
| 246. | Global 26" Pedestal Shop Fan, 1/3 HP, Single Phase |
| 247. | Air King 30" Floor Type Shop Fan, Adjustable Speed, Single Phase |
| 248. | Louisville 4 Foot Fiberglass Step Ladder, 300 Lb Capacity |
| 249. | Louisville 4 Foot Fiberglass Step Ladder, 300 Lb Capacity |
| 250. | Harvill 1,000-Ton Cold Chamber Aluminum Die Casting Machine, 66" x 66" Moving Platen, 42" x 42" Between Tie Bars, (2) Toggle Type, Central Lubrication, Hydraulic Ejection, Mechanical Intensification, Die Carrier, (2) Approx: 60 HP Motors, s/n na R&R has quoted $3,250 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 251. | Collapsable Wire Basket of Assorted Hydraulic, Air, Water, and Other Assorted Hoses |
| 252. | (4) Steel Grate Top Shop Table, 42" Diameter Tops, Approx 48" Tall |
| 253. | (2) Sections of Pallet Racking, Including: (3) Uprights, 42" Wide x 120" Tall, and (8) 72" Long Crossmembers |
| 254. | 8 Foot Wooden Step Ladder |
| 255. | (4) Steel Braided Oil Heater Hoses, 60" Long, Approx: 1-3/8" OD |
| 256. | Assorted Shovels, Brooms, and More |
| 257. | Vertical Receiver Tank, Approx 40-Gallon and Approx 20" Diameter x 41" Tall |
| 258. | Vertical Receiver Tank, 40.6 Gallon Capacity, 150 PSI Max, 20" Diameter x 40" Tall |
| 259. | Pallet of Over (50) Assorted Die Clamps |
| 260. | Denison Model DOT-050-4-S5, Hydraulic Trim Press, 38" x 46-1/2" Platens, 36" x 28" Between Tie Bars, No Ram, Control Box, No Motor R&R has quoted $250 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 261. | 2-Wheel hand truck |
| 262. | (6) Collapsable Wire Baskets, All Approx 48" x 40" x 36" |
| 263. | GSE Model 625 Digital Part Counting Scale, 11-1/2" x 10-1/2" Loading Platen |
| 264. | (10) Steel Totes of Assorted Sized Ceramic Finishing Media |
| 265. | 40" Floor Type Shop Fan, No Motor and No Fan Blade |
| 266. | Precharged Water System Tank, 36" Tall x 16" Diameter with 20-Gallon Holding Tank, and Electric Pump |
| 267. | Atlas Copco Model 30RS1110, Parts Air Compressor, 30 HP Three Phase Motor, Approx: 60" x 29" x 30" |
| 268. | Picture Frame Type Sprayer Head, OD Approx: 40" x 36-1/2" x 4" |
| 269. | Self Dumping Hopper on Casters, Overall Dimensions Approx: 37" x 52" x 45" |
| 270. | Elipse Holding Furnace, Approx: 600 Lb Capacity, Gas Fired, 27" Diameter x 24" Deep Tapered Crucible, 5" Diameter Lower Crucible Chute, Turbo Blower, CAL 9900 Digital Temperature Cotnrols, s/n na R&R has quoted $150 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 271. | Self Dumping Hopper, Fork Lift Sleeves, Overall Dimensions Approx: 37" x 52" x 38" |
| 272. | (1) Section of Pallet Racking, Including: (2) Uprights, 36" Wide x 126" Tall, and (4) 144" Long Crossmembers with Welded Middle Support Upright |
| 273. | Custom Fan Fixture with 40" x 48" x 36" Wire Basket, 36" Diameter Fan, Single Phase Motor |
| 274. | (4) Collapsable Wire Baskets, All Approx 40" x 48" x 36" |
| 275. | RimRock Model 195-03601-BO, Automatic Extractor, 60" Stroke, 40 Lb Working Capacity, 500 PSI Hydraulic Working Pressure, Hydraulic Tank and Pump, s/n C-2829, New 1982, Approx: 84" x 56" x 77" and 4,000 Lbs |
| 276. | (6) Collapsable Wire Baskets, All Approx 40" x 48" x 36" |
| 277. | (5) Collapsable Wire Baskets, All Approx 40" x 48" x 36" |
| 278. | (6) Collapsable Wire Baskets, All Approx 40" x 48" x 36" |
| 279. | (6) Collapsable Wire Baskets, All Approx 40" x 48" x 36" |
| 280. | Rimrock Model 305, Multi-Link Ladler, 40" to 70" Reach, 50 Lb Maximum Shot Size Capacity, Pedestal Mount with RimRock Remote Ladler Controls, s/n MLL-1594, New 1995 R&R has quoted $100 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 281. | (4) Collapsable Wire Baskets, All Approx 40" x 48" x 36" |
| 282. | (5) Collapsable Wire Baskets, All Approx 40" x 48" x 36" |
| 283. | (6) Collapsable Wire Baskets, All Approx 40" x 48" x 36" |
| 284. | (2) SpeedAire Portable Receiver Tanks, Approx 15-Gallon Capacity, 14" Diameter x 29" Long |
| 285. | (1) Section of Pallet Racking, Including: (2) 36" Wide x 156" Tall Uprights, and (6) 144" Long Crossmembers with Center Support Fixture |
| 286. | 30" Pedestal Shop Fan, Adjustable Speed |
| 287. | (6) Pieces of Assorted Tool Steel Including the Following Sizes: 19" x 14" x 4-1/2", 11" x 9" x 2", 19" x 9" x 2", 21-3/4" x 6-1/2" x 4-1/2", 18" x 3" x 4-1/2" and 20-5/8" x 5-3/4" x 4-1/2" |
| 288. | Sterlco model F6016-DX, Single zone oil control unit, 24,00 watt heater, Sterlco Series 400 temperature controls, vacuum gage, three phase motor and controls, SN 43591, approx 24"x 46"x60" |
| 289. | (2) Sections of Pallet Racking, Including: (3) 42" Wide x 120" Tall Uprights, (4) 96" Long Crossmembers and (4) 108" Crossmembers |
| 290. | Denison MultiPress, C-Frame Hydraulic Press, Approx 5-Ton Capacity, 24" x 15-1/2" Table, Approx 5-1/8" x 12-1/2" Hole Thru Bed, 11" Throat, 2" Diameter Ram, Three Phase Motor and Controls, s/n na, Approx: 41" x 41" x 79" R&R has quoted $100 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 291. | Assorted Pallet Racking Parts Including: (4) 42" Wide x 96" Tall Uprights and Approx (22) 96" Long Crossmembers |
| 292. | Sameca Type QS4, Hydraulic Unit with 25" x 19-3/4" x 14" Tank, Approx 2HP Motor, Three Phase, Needs Repair |
| 293. | 28" Pedestal Shop Fan |
| 294. | Patton 28" Pedestal Shop Fan |
| 295. | (3) Sections of Pallet Racking, Including: (4) 42" wide x 120" tall, Uprights, and (12) 96" Long Crossmembers with Wire Decking |
| 296. | Sterlco model F6016-DX, Single zone oil control unit, 24,00 watt heater, Sterlco Series 400 temperature controls, vacuum gage, three phase motor and controls, SN 40652, approx 24"x 46"x60" |
| 297. | TUV Hydraulic Pallet Jack, 5,000 Lb Capacity, 48" x 27" Forks |
| 298. | Steel Diamond Plate Dock Plate, 72" x 48" |
| 299. | Dake Type Arbor Press, 6" Thraot to Center of Ram, 6" Diameter Table, Approx: 1-Ton Capacity |
| 300. | Prince 800-Ton Cold Chamber Die Casting Machine, 60" x 60" Platens, 36-1/2" x 36-1/2" Between Tie Bars, 7-1/2" Tie Bar Diameter, (4) Toggle Machine, (2) Hydraulic Cores, 18" to 42" Die Thickness Capacity, Approx: 19" to 24" Shot Cylinder Stroke, Wolmik Shot End, Mechanical Intesification, Alan-Bradley PLC2-17 Controls, 50 HP Motor, Three Phase Motor and Controls, s/n na, Approx: 77,000 Lbs New 1979 R&R has quoted $2,850 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 301. | Weigh-Tronix Model PC-802, Electronic Scale, 50 Lb Capacity, 12" x 13 Platen |
| 302. | CPU System, Including: (2) Towers, 1-Tradde Mark 3Com DVD/CD Rom, 3-1/2" Floppy Drive, Windows 2000, 1-Voyageur Tower, Pentium 4 Processor, CDR Drive, 3-1/2" Floppy Drive, with Sony Multi-Scan 19" Monitor, HP Laser Jet 42 Printer, Keyboard, Mouse, and Roxbury Replacment Toner Cartridge |
| 303. | Tennsco 2-Door Metal Cabinet with 4-Adjustable Shelves, 36" x 18" x 72" |
| 304. | Various Assorted Electrical Components, Including: (2) AC Output Modules, (2) Watlow Digital Temperature Controls, Ignitron Transformers, Assorted Circuit Boards, and More |
| 305. | (3) Ejectomat Model 70, Pneumatic Control Units, 0-2 Duration Controls, 0-5 Delay Controls, Please Note: 1-Needs Repair |
| 306. | Assorted Welding Gear, Including: (2) Helmets with Over 20-PolyCarbonate Replacement Plates, Leather Welding Jacket and Gloves |
| 307. | Over (40) Assorted Filters, Including: Flow EZ Filters P100-3-100, Willson GN95 Oil Filters, and More |
| 308. | (2) Sandblasting Guns, Including: (1) Port-a-Blast Pneumatic Gun and (1) Unknown |
| 309. | Assorted Safety Equipment Including: (2) Hard Hats, (2) Mesh Face Sheilds, Respirators and More |
| 310. | Kozma Type Holding Furnace, Approx: 600 Lb Capacity, 60" x 42" Outside Dimensions of Crucible, 3" Diameter Lower Crucible Discharge, Digital Temperature Controls, s/n na R&R has quoted $200 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 311. | (2) Pneumatic Paint Spray Guns, Including: (1) Northern Industrial Tools Model 15897 and (1) Wagner |
| 312. | (2) Servo Motors, Including (1) DC Motor Type DTMT-7080, 200 Watts, 200V, 1.4 Amps, Torque 11400, 7V DC, 1,000 RPM, and (1) ZM 697 12 V |
| 313. | Various Household Maintenance Pars Including: (4) Toilet Repair Kits, Dead Bolt Lock, 2" Long Steel Rollers, Hose Holder, Foam Roll and More |
| 314. | Assorted Pressure Regulating Gas Gauges, Including: (1) Harris Model 330 Argon/Nitrogen, (1) UL Model AF150, (1) Smith HB1522B-510 and (1) Other Harris |
| 315. | RimRock Model 195-03611-BO, Automatic Extractor, 60" Stroke, Approx 40 Lb Working Capacity, 500 PSI Hydraulic Working Pressure, Hydraulic Tank and Pump, s/n 3802, Approx: 84" x 56" x 77" and 4,000 Lbs |
| 316. | Assorted Maintenance Supplies, Including: Fasteners, Electrical Terminals, Roll Pins, Grease Zurks, O-Ring Splicing Kit, and Springs |
| 317. | Approx (10) Thread Repair Kits, Including Heli-Coil Professional, Master Thread Repair Kit, Recoil Kits, and Hundreds of Assorted Coils |
| 318. | Approx (13) Hand Ladles, Some with Ceramic Coating with (3) Sives, 2-Coated, Ranges From .25 to 3-1/2 Shot Size |
| 319. | Lawson Products 4-Drawer Metal Parts Bin, Including Contents of Assorted Set Screws, Brass Fittings, Screws, and Nuts, Approx: 20-1/4" x 15" x 13" |
| 320. | Quincy Model 350-18, Recipricating Type Air Compressor, 10HP, 120-Gallon Tank, s/n 975847-L8 R&R has quoted $100 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 321. | (5) Assorted Steel Ladle, Including (2) 9 Lb Shot, (2) 8 Lb, and (1) 18 Lb with LaFrance Bucket of Ceramic Coating, Approx 1/4 Full |
| 322. | Assorted Abrasives, Including: (9) 80-Grit Aluminum Oxide, Approx: 60" x 6" Belts, (2) Merit Abrasives Grind-o-Flex Wheels, 11" Diameter 2" Thick with 1-3/4" Hole and Over (75) Assorted Smaller Sanding Material |
| 323. | (2) Metal Shelving Units with 12-Adjustable Shelves Each, Including Contents of Assorted Rubber Gaskets, Fuse Holders, Fuses, Socket Set Screws, Electronic Equipment, Fans, Fittings, and More, Approx: 36" x 12" x 75" Each |
| 324. | (2) Wood Frame Back-To-Back Shelving Units with Metal Shelves, 38" x 26" x 92" Overall, Includes Contents of Assorted Shafts, Bearings, Spacers, Rings, Gears, Air Dry Clay, Controllers, Heater Elements, Light Bulbs, Ballasts, and More |
| 325. | 66-Compartment Metal Parts Shelf, Approx: 36" x 12" x 85", Including Contents of Assorted Fittings, Set Screws, Conduit Parts and More |
| 326. | Steel Shelving Unit with 15-Adjustable Shelves and (32) Metal Parts Drawers, Including Contents of Assorted Hose Clamps, Pipe Bushings, Pipe Plugs, Screws, Snap Rings, Anchors, Bearings, Dowel Pins, Bolts, and More, Approx: 36" x 12" x 85" |
| 327. | Steel Shelving Unit with 17-Adjustable Shelves, Approx: 36" x 12" x 85" with (76) Metal Parts Drawers, Including Contents of Assorted: Fittings, Brushes, Nuts, Bolts, Cap Screws and More |
| 328. | Steel Parts Shelf with Approx 75-Compartments, Including Contents of Assorted Pipe Nipples, Bushings, Fittings, and More, Approx: 36" x 12" x 86" |
| 329. | Metal Frame, Laminate Wood Top Office Desk with 5-Drawers, Lockable, Approx: 70" x 36" x 29" with Laminate Wood Bookshelf with 3-Adjustable Shelves, 36" x 46-1/2" x 12" |
| 330. | Rimrock Model 305, Multi-Link Ladler, 40" to 70" Reach, 50 Lb Maximum Shot Size Capacity, Pedestal Mount with RimRock Remote Ladler Controls, s/n MLL-1583, New 1995 R&R has quoted $100 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 331. | (2) Sections of Pallet Racking Including: (3) Uprights, 30" Wide x 72" Tall, (8) 48" Long Crossmembers, and (8) 96" Long Crossmembers with Wood Decking |
| 332. | Assorted Building Signs, Safety Signs, Tags, and Stensiles |
| 333. | Over (25) Assorted DE-STA-CO Type Clamps Includes No. 207-U, 217-U, 213-U, And More. |
| 334. | (14) Assorted Air Guns. |
| 335. | (32) Assorted Eye Bolts Between 1/2" - 1 1/2". |
| 336. | (4) Assorted Pipe Wrenches (2) 24", (1) 18", (1) 10" Chopped. |
| 337. | (20) Assorted Large Wrenches Includes Combination And Boxed End Up To 2 1/4". |
| 338. | Waterloo 3 Drawer Tool Cart With Lower Cabinet 26 7/8" x 18 1/4" x 34 1/2". |
| 339. | (2) 40" Die Hooks. |
| 340. | Blackstock Hydraulic Trim Press, 70-1/2" x 46-1/2" Platens, 60" x 36" Between Tie Bars, 12" x 6" Hole Thru Bed, 5" Diameter Ram, 20 HP, Three Phase Motor and Controls, s/n 1117 R&R has quoted $650 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 341. | (2) Pneumatic Hand Tools, (1) Ingersoll-Rand Model 312 Orbital Sander SN 1N10, 90PSI And (1) Butterfly 3/8" Impact Wrench. |
| 342. | (9) Assorted Hand Tools (3) Snap Ring Pliers Internal And External, Wire Stripper, (2) Crimping Pliers, And More. |
| 343. | Cole Parmer Digi-Sense Thermocouple Thermometer Type K, Model 91000, Range 50.0 To 1999.00 Degrees. |
| 344. | (2) Electric Hand Tools, (1) Dewalt 3/8" Model DV100 VSR Drill 120V Needs Cord And (1) Grinder/Sander 120V. |
| 345. | (4) Pipe Wrenches, (1) Rigid No25 Nut Wrench, (2) Aluminum Pipe Wrenches, (1) 18" Diamalloy Steel Adjustable Wrench. |
| 346. | (2) Pneumatic Hand Tools, (1) Ingersoll-Rand 3/8" Drive Ratchet 90PSI, Pmax 6.2, And (1) Air Tools Right Angle Grinder. |
| 347. | (2) Metal Tool Boxes With Contents And Steel Cart With 3 Shelves, (1) All American Tool Box 19 1/4" x 7" x 8" And (1) HOMAX Tool Box With 3 Drawers And Upper Shelf 22 1/4" x 9 1/2" x 12 3/4", Cart 36" x 24" x 31 1/2". |
| 348. | (2) 1/2" Pneumatic Impact Guns, (1) Chicago Pneumatic Model CP7344, 90PSIG, 4 Speeds Forward And Reverse And (1) Husky 3 Speeds Forward And Reverse. |
| 349. | Kennedy 5 Drawers Tool Cart 27" x 18" x 35 5/8". |
| 350. | Prince 600-Ton Cold Chamber Aluminum Die Casting Machine, 51" x 53" Platens, 29" x 29" Between Tie Bars, 6" Diameter Tie Bars, 3,000 PSI Accumulator Intensifyer, (2) Hydraulic Cores, Die Carrier, Free Standing Control Box, 40 HP, Three Phase Motor and Controls, s/n D-74023, Approx: 70,000 Lbs, New 1974 R&R has quoted $2,300 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 351. | 2-Ton Capacity Cherry Picker, 60" Fully Extended Arm, Fold Up Legs, with 8-Ton Ram Jack |
| 352. | Banding Cart with 1/2" Wide Nylon Banding, with Banding Clips |
| 353. | Metal Banding Cart with Clips, Crimper, and Tin Snips |
| 354. | 2-Wheel hand truck |
| 355. | 2-Wheel hand truck |
| 356. | Sterlco Model F6016-BX, Single Zone Oil Temperature Control Unit, 24,000 Watt Heater, Sterlco 400 Series Controls, 1 HP, On Casters, Three Phase, s/n 72116 |
| 357. | (2) Sections of Pallet Racking Including: (3) Uprights, 42" Wide x 144" Tall, and (8) 96" Long Crossmembers |
| 358. | Self Dumping Hopper, Fork Lift Sleeves, Approx Overall Dimensions: 60" x 64" x 47" |
| 359. | Self Dumping Hopper, Fork Lift Sleeves, Approx Overall Dimensions: 60" x 72" x 48" |
| 360. | Kozma Holding Furnace, Approx: 600 Lb Capacity, 24" Diameter x 20" Deep Tapered Crucible, 5" Diameter Lower Crucible Chute, Gas Fired, Digital Teperature Controls, s/n na, Approx: 54" x 79" x 47" R&R has quoted $200 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 361. | (2) Sections of Pallet Racking, Including: (3) Uprights, 42" Wide x 144" Tall and (8) 144" Long Crossmembers |
| 362. | (1) Section of Pallet Racking, Including: (2) 42" Wide x 138" Tall Uprights, and (6) 96" Long Crossmembers |
| 363. | Pallet of Assorted Enerpac Hydraulic Products, Including: Model PUJ1200B Pump, Single Phase and (3) Turbo 2 Foot Pedals |
| 364. | Pallet of Assorted Length Air Hose |
| 365. | RimRock Model 290, Die Lube Mixer, Wall Mount, s/n 32735, Newe 1995 |
| 366. | (2) Sections of Pallet Racking, Including: (3) Uprights, 42" Wide x 120" Tall, and (8) 120" Long Crossmembers |
| 367. | (2) Sections of Pallet Rack Type Shelving, Including: (3) Uprights, 30" x 72", (6) 72" Crossmembers, and (6) 48" Crossmembers, Contents Not Included |
| 368. | (2) Sections of Pallet Rack Type Shelving, Including: (3) Uprights, 30" Wide x 72" Tall, and (11) 48" Long Crossmembers |
| 369. | Central Machine Model 1058C, Single Spindle Drill Press, 11-1/2" Diameter Table, 8-1/4" Throat, 16-Belted Speeds: 170 to 3,800 RPM, 1 HP, Albrecht Keyless Chuck, Single Phase |
| 370. | Clearing Hydraulic Trim Press, 41-1/2" x 28" Bed, 10" x 13-1/4" Hole Thru Bed, (2) 4" Diameter Rams, Hand/Auto Cycle Controls, 20 HP, Three Phase Motor and Controls, s/n na R&R has quoted $650 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 371. | Dayton Single Spindle Drill Press, 12" x 12" T-Slotted Table, 8" Throat, 5-Belted Speeds, 3/8" Capacity Drill Chuck, 1/2 HP, Single Phase |
| 372. | (1) Section of Pallet Racking, Including: (2) Uprights, 42" Wide x 72" Tall, (4) 96" Long Cross Members with Steel Decking |
| 373. | Speedaire Portable Receiver Tank, Approx 15-Gallon, 175 PSI Max, Approx: 14" Diameter x 29" Long |
| 374. | Vertical Receiver Tank, Approx 15-Gallon and 14" Diameter x 30" Tall |
| 375. | RimRock Model 310 Recipricator, Approx 100" Reach, with Rimrock Recipricator Controls on Pedestal Stand, s/n MLR0668, New 1994 |
| 376. | Delta Single Spindle Drill Press, 26" x 15" Plain Production Table, 6-1/2" Throat, No. 2 Morse Taper Spindle, Belted Speeds, Head Elevation Mechanism, 1-1/2 HP, Three Phase Motor and Controls, s/n 109-794, Approx: 32" x 36" x 86" and 750 Lbs |
| 377. | (2) Sections of Pallet Racking, Including: (3) Uprights, 42" Wide and with Heights Ranging From 108" to 144", and (8) 108" Long Crossmembers |
| 378. | Approx (600) Unfolded Cardbaord Boxes, 12" x 12" x 10" |
| 379. | Approx (550) Unfolded Cardboard Boxes, 8" x 8" x 8" |
| 380. | Nicollet Process Engineering Model PM20, Portable Process Monitoring System, Version PPM, Shot Monitoring and Report System, Computer, Monitor and Printer on Metal Roller Console R&R has quoted $50 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 381. | Approx (24) Dozen Cardboard Dividers, 16-Squares, Approx: 14" x 14" x 6-3/4" |
| 382. | Approx (600) Unfolded Cardbaord Boxes, 8" x 8" x 8" |
| 383. | Approx (500) Unfolded Cardboard Boxes, 10" x 10" x 10" |
| 384. | Approx (300) Unfolded Cardboard Boxes, 12" x 12" x 10" |
| 385. | Approx (500) Unfolded Cardboard Boxes, 12" x 12" x 10" |
| 386. | Approx (300) Unfolded Cardboard Boxes, 10" x 10" x 10" |
| 387. | Approx (325) Unfolded Cardboard Boxes, 12" x 12" x 12" |
| 388. | Pallet of Thousands of Cardboard Pads, Primarly 9-1/2" x 9-1/2" and 11-1/2" x 11-1/2" |
| 389. | 2-Wheel Hand Truck |
| 390. | Clearing Type Hydraulic Trim Press, 42" x 32" Bed, 34" x 24-1/2" Between Tie Bars, 4" Diamter Ram, 18" x 12" Hole Thru Bed, 15 HP, Three Phase Motor and Controls, s/n na R&R has quoted $200 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 391. | 2-Wheel Hand Truck |
| 392. | (2) Pallets of Flat Cardboard, Approx: 48" x 43" Sheets (Used) |
| 393. | 3-1/2" Adjustable Angle Vise |
| 394. | Palmgren 4" Drill Press Vise |
| 395. | RimRock Model 310 Recipricator, Approx 78" Reach, s/n na with RimRock Reciprocator Controls on Pedestal, Please Note: Controls are Not Wire to Sprayer |
| 396. | 3-1/2" Adjustable Angle Vise |
| 397. | Walker-Turner Single Spindle Drill Press, 12-1/2" x 17" Plain Production Table, 8-1/2" Throat, with Procunier Size 3 Lead Screw Tapping Attachment, 3-1/4" Capacity, with 6-Spindle Attachment, Remote Foot Switches, Belted Speeds, 1 HP, Three Phase Motor and Controls, s/n 124-9782, Approx: 30" x 30" x 84" and 400 Lbs |
| 398. | Heavy Duty Metal Frame Shop Cart, Wood Deck, Approx: 60" x 30-3/4" x 28", Contents Not Included |
| 399. | Heavy Duty Metal Frame Shop Cart, Wood Deck, Approx: 60" x 30-3/4" x 28", Contents Not Included |
| 400. | Wheelabrator Shot Blast Tumbler, 30" Diameter x 37" Wide Conveyor, Approx 6 Cubic Foot Barrel Volume, 500 Lb Maximum Charge Weight, 16 Cubic Inch Maximum Part Size, 31 Lb Maximum Part Weight, Single Door, Shot Return Elevator, Timer, Forward/Reverse, 15HP Main Motor, Three Phase Motor and Controls, s/n 137373, Approx: 96" x 84" x 132" R&R has quoted $400 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 401. | (3) Pneumatic Hand Tools, (1) 3/8" Butterfly Air Impact Wrench, (1) Pit Pro Model PT2430 Grinder SN 04020302, 22,000 RPM And (1) Right Angle Grinder. |
| 402. | (9) Pairs Of Precision Ground Parallels 6" x 1/8" Between 5/8" To 1 5/8" by 1/8ths In Plastic Case. |
| 403. | Lot of (3) Hammers, (11) Screwdrivers, Deburring Tools, Files And Bearing Scrapers. |
| 404. | Kalamazoo 1" Adjustable Belt Sander, 1/3HP 115/208-230V, 1725RPM. |
| 405. | (11) Assorted Hammers. |
| 406. | (2) Caulking Guns With New Tubes Of TREM PRO 644 RTU Silicone Caulk. |
| 407. | Cast Iron Sanding Plate 18 3/8" x 12 3/8" x 2". |
| 408. | Large Lot Of Assorted Allen Wrenches. |
| 409. | Box Of Assorted Hand Tools Including C-Clamps, Vise Grips, Levels, 1/4" Sockets, Squares, Brushes And More. |
| 410. | Taiwan Horizontal Band Saw, Approx 9" x 10" Capacity, 9" Round Capacity, 3/4" Wide Blade, Angle Vise, Belted Speeds, 1 HP, Single Phase Motor and Controls, s/n na R&R has quoted $50 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 411. | 5 Drawer Kennedy Tool Cart 20 5/8" x 13 5/8" x 32 7/8". |
| 412. | 2 Wheel Steel Frame Torch Cart 20 3/4" x 14" x 46 1/2". |
| 413. | Master Craft 3 Drawer Metal Tool Chest 20 1/2" x 8 3/4" x 12". |
| 414. | Craftsman 3 Drawer Plastic Tool Chest 20 1/2" x 10 1/4" x 13 1/2". |
| 415. | Craftsman Model SST2, No. 959027 Sit/Stand Tote Truck Has Telescoping Handle Pulls Out 37", 2 Portable Tool Trays 24" x 16 1/2" x 19". |
| 416. | HOUT 3 Drawer Tap Cabinet, Sizes 1/4"-20 to 1"-12, 14 3/4" x 7 1/2" x 8" With Contents. |
| 417. | Blake Mfg Co. CO-AX Indicator With Assorted Attachments In Wood Case And Two Magnetic Indicator Stands. |
| 418. | Precision Ground Drilled And Tapped 1/4"-20, Angle Plate 5 5/8" x 8 1/8" x 10 1/8". |
| 419. | (3) Plastic And Metal Utility Organizer Cabinets, (2) 17 1/8" x 11" x 11 1/8" One With 16 Trays, The other With 13 Trays, And (1) 19 Trays 18 1/8" x 6 1/2" x 8 3/4". |
| 420. | Almco Model OR-20, Vibratory Finishing Mill, 20 Cubic Foot Capacity, 8" x 14" Discharge Chute, Solution Tank, Ceramic Media, Timer, 15 HP, Three Phase Motor and Controls, s/n SO9676, Approx: 66" x 100" x 72" R&R has quoted $200 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 421. | (5) Rimrock Pneumatic Spray Guns With Rubber Hose. |
| 422. | Radio Wheel Barrel Steel Bucket Pneumatic Tire 24 1/2" x 38 1/2" x 12" Deep Bucket. |
| 423. | Steel Frame Work Station With Upper And Lower Shelf, Drawer And Light, Pneumatic Hose Line And Regulator 3/8" Drive Clecomatic Pneumatic Wrench 48 5/8" x 30" x 90". |
| 424. | Wood Frame Work Table With Laminated Top And 6 Lower Drawers 72" x 30" x 36 1/2". |
| 425. | Heavy Duty Steel Cart With Lower Shelf With Contents Of Assorted Bolts, O-Rings, Hold Down Arms, 36 1/2" x 24" x 38". |
| 426. | Steel Frame Rolling Work Station 38 7/8" x 21 1/4" x 36 5/8". |
| 427. | Yuasa 6 Speed Drill Fixture With 3 Phase Motor And Controls. |
| 428. | (6) Assorted Metal Frame Tables And (1) Wood Frame Up To 35 3/4" x 18" x 35 1/2". |
| 429. | Hardinge-SJOGREN No.3- 5 Speed Collet Chuck. |
| 430. | Wismatic 5-Station Automatic Drilling and Tapping Machine, 36" x 54" Table (Tooling Area), (2) Hypneumat Horizontal Drill Heads, (1) Hypeumat Horizontal Tapping Head with Commander Type Multiple Drilling Head Attachment, (1) Hypneumat Vertical Tapping Head with Cammander Multiple Spindle Drilling Head, Coolant, s/n 54-28, Approx: 120" x 96" x 94" and 6,500 Lbs R&R has quoted $250 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 431. | Hundreds Of Assorted Socket Cap Screws, Dowel Pins, Shoulder Bolts, Hex Bolts, And More, Up To 3/4"-10. |
| 432. | Assorted Used Hydraulic Cylinders, Fixture & Excell 6 Gallon Rag Container. |
| 433. | Eagle Model 1632 Plastic Spill Container. |
| 434. | Fairbanks Steel Scale Platform 48" x 48". |
| 435. | Approximately (20) Samsonite Steel Frame And Plastic Seat Folding Chairs. |
| 436. | Over (12) Assorted Brooms And Shovels. |
| 437. | (2) Metal Vertical Filing Cabinets, (1) 4 Drawer 14 7/8" x 26 1/2" x 52 1/8", (1) 15" x 18" x 29" 2 Drawer. |
| 438. | AMACO Electric Kiln Model AH6, 6KW, 1 Phase, 208V, Max Temp 2350, 28.8A, SN 6C28, 32" x 30" x 61". (On Mezzanine With Stairs Only, Buyer Responsible For Removal) |
| 439. | Toledo/Bell & Howell Platform Scale 29 1/2" x 21 1/2" Platform Total 40" x 26 1/2" x 51". (On Mezzanine With Stairs Only, Buyer Responsible For Removal) |
| 440. | Econoline Model 36-1, Blast Cabinet, 34" x 20" x 22" Inside Dimensions, Worklight, s/n X2-1741, Approx: 36" x 30" x 63" and 225 Lbs R&R has quoted $50 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 441. | (6) Steel Frame Laminated Wood Tops Folding Tables 96" x 30". (On Mezzanine With Stairs Only, Buyer Responsible For Removal) |
| 442. | 18" Diameter Dome Mirror With Metal Frame Cart 30" x 33" x 25 1/2" And Steel Frame Wood Top Stairs 26" x 28" x 22". (On Mezzanine With Stairs Only, Buyer Responsible For Removal) |
| 443. | (3) Floor Scrubbers (1) General Model 371L14-3120, 115V 1/3HP, 5.4A, 1ph, 1725RPM, SN 65, (1) 24" Diameter Pneumatic Floor Sprayer/Power Washer, (1) Advance Pacemaker For Parts. |
| 444. | Eagle Plastic Containment Pallet 106 1/2" x 30 1/4" x 6 3/4". |
| 445. | Eagle Plastic Containment Pallet 106 1/2" x 30 1/4" x 6 3/4". |
| 446. | CINDOL 3401 Metal Working Fluid- Straight Oil 55 Gallon Barrel Approximately Half Full. |
| 447. | American Die Cast Releasents WAYLUBE 220, 55 Gallons. |
| 448. | 55 Gallons Of AW150 Hydro Oil. |
| 449. | (2) 55 Gallon Drums Of ADCR TRENNEX 899E Oil For Industrial Use Only With Metal Pour/Spill Stand 51" x 24" x 24 1/4", One Full And One Appears Over Half Full. |
| 450. | New 2006Alternative Energy Systems Model WB-550, WB/HVS Water Bath Vaporizer/Venturi Mixer, 50 MMBTU/hr Capacity, 550 GPH LPG @ 0 Degrees Vaporizer Capacity, 240-Gallon Bath Capacity, 650F Deseign Temperature, 250 PSIG Deseign Pressure, 375 PSI Test Pressure, 660,000 BTU Burner Input, (5) Venturis @ 10 MMBTU Each, 500-Gallon Surge Tank Capacity, Enclosed Operater's Structure, Uticor Power Panel Digital Controls, Honeywell Burner Controls, 1/2 HP Three Phase Pump Motor, s/n WB06-6150 Approx: 84" x 160" x 92" and 6,000 Lbs with Empty Bath R&R has quoted $850 for a basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 451. | Assorted Straight shank reamers, sizes range from 1/4" - 1 1/4" |
| 452. | Assorted HSS reamers sizes range from 1/4" to 1 3/4" some carbide tipped |
| 453. | Assorted Straight shank reamers, sizes range from 1/8"- 1/2" |
| 454. | Assorted drill bits from 1/8" - 1/2" |
| 455. | Assorted straight shank end mills, from 43/64"- 1 1/4" |
| 456. | Assorted carbide tool bits includes end mills, taps, drill bits, and more |
| 457. | Assorted HSS Straight shank fractional drill bits from 1/4"-11/16" |
| 458. | Assorted HSS Taps |
| 459. | Assorted HSS Taps some roughing mills |
| 460. | Universal-Automatic Double End Horizontal Drilling Machine, 2-Universal Madel A Drilling Heads, 3" Maximum Stroke of Quill, 9" Horizontal Adjustment of Individual Heads, 54" x 30" Plain Production Table, Cycle Controls, 3/4 HP, Coolant R&R has quoted $150 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 461. | Assorted HSS Taps |
| 462. | Assorted step clamps |
| 463. | Assorted step blocks and t nuts |
| 464. | MHC 58 piece Clamping kit |
| 465. | Assorted fractional drill bits, from 7/16" - 1 1/8" |
| 466. | Assorted slitting saws |
| 467. | Assorted New HSS reamers from 9/64"- 15/64" |
| 468. | Assorted Hss Taps Some new |
| 469. | Assorted HSS index bits |
| 470. | K.O. Lee Model 718HG, Hydraulic Surface Grinder, 20" Longitudinal Table Travel, 7-1/4" Cross Table Travel, 8" Maximum Diameter Wheel Capacity, 16" Maximum Under 8" Wheel to Table Top, 6" x 14" Permanent Magnetic Chuck, Coolant, Approx 1-1/2 HP, Three Phase Motor and Controls, s/n 11110-567 R&R has quoted $100 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 471. | Assorted HSS drill Bits |
| 472. | Assorted HSS and Carbide cutters |
| 473. | (2) 3/4" Straight Shank Tap Collet Holders, with (7) Tap Collets |
| 474. | (2) 3/4" Straight shank Tap collet holders with (8) Tap Collets |
| 475. | Over (60) Assorted MT and other collets and drill bits |
| 476. | Assorted HSS and Carbide End Mills and cutters |
| 477. | Over (100) Assorted Drill Bits |
| 478. | Over (75) Assorted HSS Specialty Cutters up to 1" |
| 479. | (4) Assorted Cogsdill Burnishers (1) CTP SR-500-531, (1) CTP RES-8906, (1) SR-375-B, (1) SR-625 |
| 480. | Nakamura-Tome Model Slant Jr, CNC Combination Turning Center, 15.75" Swing Over Slide Covers, 11.02" Swing Over Saddle, 11.81" Maximum Turning Length, 18.98" Maximum Between Centers, 1-5/8" Round Bar Capacity, 2.17" Hole Thru Spindle, 10-Position Turret, 4,500 Maximum RPM, Fanuc O-T CNC Controls, Tape Reader, Tailstock, Coolant, Chip Conveyor, 10 HP, Three Phase Motor and Controls, s/n 17311, Approx: 110" x 52" x 65" and 5,700 Lbs R&R has quoted $300 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 481. | Mandrin Flottant 3/4" Tool Holder, C21619CJJ |
| 482. | (3) DuMont 3/16-C Broaches |
| 483. | Hundreds of MT Collets |
| 484. | (2) Milling arbors double Blade, (1) 1 1/4"x 1/16", (1) Phase II 1 1/4"x 1 1/2" |
| 485. | (3) Tap Collet Holders (2) 1" Shank (1) 5/8" Shank |
| 486. | (8) Square Shank Insert type turning tools |
| 487. | (2) 3/4" Collet type tool holders (1) Parlee ER20-750-611 (1) ST 3/4x4" ER20E |
| 488. | (12) Insert type Boring Bars from 1/2" to 1" |
| 489. | (10) Assorted insert type boring bars from 1/2" to 1" |
| 490. | Kalamazoo 8" Belt Sander, 12" x 8" Tilting Table, Three Phase Motor and Controls, s/n na, Approx: 37" x 35" x 72" and 700 Lbs R&R has quoted $50 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 491. | (3) Criterion adjustable boring heads, (1) TS-250 1750 1 1/2-18, (1) DBL-202, 1 Div= .001 |
| 492. | Approx (16) R8 Collets |
| 493. | (3) Adjustable insert type Boring bars, (1) 1" Shank ATG C- 13152, (1) CSS 1263 |
| 494. | (8) Assorted insert type Boring Bars up to 1" shank |
| 495. | Over (70) New NSK A01 6205DV Ball Bearings |
| 496. | Parlee 6" Precision Machine Vise, Model P688 Angle Lock Vise on Rotory Base with Extra Jaws |
| 497. | Kurt 6" Precision Machine Vise Model D675 with 12" Aluminum Jaws |
| 498. | Kurt 6" Precision Machine Vise with handle |
| 499. | Willis 6" Machine Vise with handle and (2) Sets of extra jaws |
| 500. | Mississippi Tank Company, LP Holding Tank, 15,300 Gallon Capacity, 96" Diameter x 536" Long, 650F Maximum Temperature, with Temperature and Tank Volume Content Guages, s/n 72868, Appears to be New in 1971 R&R has quoted $950 for a basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 501. | (2) Procunier Size #2 Tapping Attachment |
| 502. | Palmgren 6" Drill Press Vise |
| 503. | Kurt Style 6" Machine Vise with aluminum jaws and handle |
| 504. | (30) 5C Collets from 1/8" to 1 1/8" |
| 505. | Approx (16) R8 Collets |
| 506. | Aloris type tool post model NA |
| 507. | Aloris Tool Post Model CXA |
| 508. | Approx (35) HSS End mills from MBC Industrial supply, and a Box of 21CM HSS Cap Screws |
| 509. | (1) Jacobs Ball Bering Super Chuck No. 18N, 1/8, 3/4 Capacity, with No. 4 MT Shank, (1) Chandler-Duplex Adjustable boring head with No. 4 MT Shank |
| 510. | Natco Model G-7, Mutiple Spindle Drilling Machine, 36-Spindle, 16" x 40" Table, 16" Stroke of Table, Up-Acting Type Table, 5/8" to 3/4" Diameter Uppers, 13-1/2" x 38-1/2" Inside Head, Drill & Tap Cycle Controls, 153 to 2,690 RPM with Change Gears, Hydraulic Table Feeds, Coolant, s/n D7-188, Approx: 78" x 68" x 88" and 10,000 Lbs R&R has quoted $200 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 511. | (4) Assorted Tap Collet Holders |
| 512. | (4) Assorted Chucks, (1) Rexon RJ3-16H, (2) Kacobs Super Chuck 34-33, (1) Select |
| 513. | (5) R8 Shank Tools, (3) End Mill Holders, (2) Cutters |
| 514. | Suburban Tool "Master Grind" Model MG-5CV-S1, Combination 5C collet and V- Block Index Fixture in box |
| 515. | (4) Assorted Coolant Thru Toolholders with 1-1/8" Shank |
| 516. | Assorted Tooling Including: (1) V-Block, (1) Sine Bar, and (4) Assorted Straight Edges |
| 517. | (7) Assorted Insert Type Shell Mills |
| 518. | (2) Criterion Adjustable Boring Heads Including: (1) DBL-203 and (1) DBL-202 |
| 519. | (5) Assorted Aloris Tool Post Tool Holders, Including: CXA8, CXA1, CXA6, CXA2, and CXA4 |
| 520. | Hardinge Model Conquest 42, Combination CNC Combination Turning Center, 19-1/2" Swing Over Upper Way Cover, 14-1/2" Swing Over Lower Way Cover, 14" Maximum Distance From Spindle Face to Turret Face, 12-Position Turret, 1-7/8" Hole Thru Spindle, 5,000 RPM Spindle, GE Fanuc OT CNC Controls, RS232 Port, 6-1/2" 3-Jaw Chuck, Partial Parts Catcher, Coolant, Chip Coveyor, Partial Tailstock, 7-1/2 HP, Three Phase Motor and Controls, s/n CS0008220-AK, New 1989, Approx: 136" x 56" x 69" and 7,500 Lbs R&R has quoted $300 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 521. | Hardinge Model HV-4N 5C Collet Closer |
| 522. | Assorted 5C Collet Closer Parts and (10) Assorted 5C Collets |
| 523. | (7) Assorted Insert Type Fly Cutters |
| 524. | (5) 1-2-3 Blocks |
| 525. | (2) Assorted Jacobs Drill Chucks, Including: (1) 18N with No. 4 JT and (1) with 3/4" Shank |
| 526. | 3" Machinist's Vise |
| 527. | Assorted Number and Letter Punch Sets |
| 528. | Approx (25) Assorted Drills |
| 529. | Assorted Morse Taper Drills and Tool Holders |
| 530. | Bridgeport Vertical Milling Machine, 9" x 42" T-Slotted Table, 24" Longitudinal Table Travel, 12" Cross Table Travel, 13" Vertical Adjustment of Knee, R8 Spindle Taper, Belted Speeds: 80 to 2,720 RPM, 1 HP, Three Phase Motor and Controls, s/n 79581, with Setco Model SPL Milling Attachment, 3,600 RPM, 3 HP, with Insert Type Shell Mill, s/n 108808, Approx: 75" x 68" x 72" and 2,500 Lbs R&R has quoted $100 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 531. | (5) Assorted Insert Type Boring Bars |
| 532. | Approx (14) Assorted Specialty Cutters |
| 533. | Approx (30) Assorted Square Shank Carbide Tipped Cutters |
| 534. | (4) Kennametal Kwik-Change 40-Taper Tool Holders, Including: (3) Endmill Holders, and (1) Collet Holder with (8) Assorted Collets |
| 535. | (2) Albrecht 1/2" Keyless Chucks |
| 536. | (9) Assorted Morse Taper Drills up to 2-1/4" |
| 537. | Hold Down Set |
| 538. | Troyke Rotary Table, 15" Diameter T-Slotted Table |
| 539. | Walker-Ceramax 6" x 12" Permanent Magnetic Chuck |
| 540. | Eagle Model C5160V1, 5 HP Recipricating Air Compressor, Single Stage, 80-Gallon Vertical Receiver Tank, Single Phase, s/n E28096, Approx: 28" x 19" x 65" and 250 Lbs R&R has quoted $50 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 541. | Over (50) Assorted Taps |
| 542. | Over (30) Large Taps |
| 542A. | (5) Assorted Hardinge Tool Holders for CNC Lathe, Including: (3) CS-34, (1) CS-21 and (1) CS-30 |
| 543. | Pink Granite Surface Plate, No Lip, Approx: 24" x 18" x 3-1/2" On Metal Stand |
| 544. | Metal Frame, Wood Top Work Bench with Drawer and Upper Shelf, Approx: 72" 30" x 46" |
| 545. | Cutting Machine Model LTN-2160, Cut-Off Saw, 16" Maximum Wheel Size, Angle Table Vise, 5 HP, Three Phase Motor and Controls, s/n 9618 |
| 546. | Dayton Model 22347X, Double End Pedestal Grinder, 7" x 1" Maximum Wheel Size, 5/8" Arbor, 3,400 RPM, Single Phase Motor and Controls |
| 547. | Metal 72-Drawer Parts Cabinet, Including Contents of Assorted Springs, Bolts, Core Pines, Leader Pins, and More |
| 548. | Metal Frame Wood Top Work Bench with Upper Shelf, and Single Phase Outlet, Approx: 72" x 30" x 46" |
| 549. | Steel Top Welding Workbench with Lower Shelf, Approx: 72" x 42" x 33-1/2" with Columbian Model 4500, 5-1/2" Bench Vise (Welded to Top) |
| 550. | Mazak Model H-400, CNC Horizontal Machining Center, (2) 15.7" x 15.7" T-Slotted Pallets, 22.05" X-Travel, 18.11" Y-Travel, 20.08" Z-Travel, 19.30" Maximum Distance From The Center of Spindle to the Stop Surface of the Pallet, 24.02" Maximum from Spindle End to the Center of Pallet, CAT-40 Spindle Taper, 7,000 RPM Maximum, 60-Tool Automatic Tool Changer, Mazatrol M-32 CNC Controls, Daiken Chiller, High Pressure Coolant, Chip Conveyor, s/n 92796, New 1990, Approx: 96" x 166" x 103" and 16,500 Lbs R&R has quoted $1,000 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 551. | Over (30) Assorted Carbide End Mills |
| 552. | Over (20) Assorted HSS and Carbide End Mills |
| 553. | Steel Foreman's Desk with 1-Drawer and 1-Cabinet, Approx: 34-1/2" x 30" x 53" |
| 554. | Over (60) Assorted Carbide End Mills |
| 555. | Assorted Specialty Cutters |
| 556. | Hundreds of Assorted HSS Drills |
| 557. | Approx (15) Assorted Lappers |
| 558. | Over (80) Assorted HSS Reamers up to 1" |
| 559. | Marshall-Jackson 5-Drawer File Cabinet, Approx: 15" x 57" x 27-1/2" |
| 560. | Burgmaster Model 1D, Turret Drilling Machine, 24" x 36" Plain Production Table, 8" Throat, 1/2" Rated Capacity, 4-Drill Chucks, 1-Tapping Head, 1-1/2 Hp 2-Speed Motor, Three Phase Motor and Controls, s/n 1D-1726, Approx: 38" x 25" x 72" and 750 Lbs R&R has quoted $50 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 561. | (1) Section of Pallet Rack Type Racking, Including: (2) 17" Wide x 72" Tall Uprights and (8) 99" Long Crossmembers, Contents Not Included |
| 562. | Steel Self Dumping Hopper, Approx: 45" x 69" x 46" |
| 563. | Economy Engineering Model Mark V-78, Die Lift Cart, 24" x 24" Loading Platform, 77" Maximum Lift Height |
| 564. | Metal Torch Cart with (4) Assorted Torch Attachments and (2) Sets of Hoses with Guages |
| 565. | Hold Down Set |
| 566. | (2) Hold Down Sets |
| 567. | Metal Frame, Metal Top Cart with Lower Shelf, Approx: 24" x 40" x 32" |
| 568. | (3) Assorted Partial Drill Indexes |
| 569. | Drill Sharpener, 6" Diameter Wheel Capacity, 1/3 HP, 3,450 RPM, Single Phase |
| 570. | Natco Model G-5, Mutiple Spindle Drilling Machine, 12-Spindle, 14" x 18" Table, 10" Up-Acting Travel of Table, 3/4" Diameter Uppers, 9" x 14" Inside Head, Drill & Tap Cycle Controls, s/n G5-970, Approx: 26" x 56" x 96" and 4,500 Lbs R&R has quoted $150 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 571. | (2) Diamond Wheel Dressers with Other Assorted Grinding Fixtures |
| 572. | Rocklinizer Electronic Carbide Metal Impregnator, Model 600, Single Phase |
| 573. | Rubbermaid Type Plastic Shop Cart, with Lower Shelf, 40" x 25-1/2" x 32-1/2" |
| 574. | Steel Welding/Workbench, Approx: 76" x 43" x 30-1/2" |
| 575. | (3) Assorted CAT-40 Toolholders, Including: (1) Parlec C40-10SM2 with Carboly R220-13-03.00-CT Insert Type Shell Mill, (1) Narex JTA6-45U with Jacobs 34-06 1/2" Capacity Drill Chuck, and (1) Collis 77800 40CVXQC Tapping Tool Holder |
| 576. | (3) Assorted CAT-40 ToolHolders, Including: (1) Command C4J4-0033 with Rohm Supra 3/8" Keyless Chuck, (1) Command C4C4-0020, Collet Holder and (1) C40C#1-4.56 Tapping Head |
| 577. | (3) Assorted CAT-40 Toolholders, Including: (1) Hertel HCV40ER20590 Collet Holder, (1) Command C4C4-1000, Collet Holder, and (1) Command C4J4-0003, with Jacobs 3JT 1/2" Drill Chuck |
| 578. | (4) Assorted CAT-40 Toolholders, Including: (1) Accupro CAT401-1/4-4.00" End Mill Holder. (1) Parlec C40-03JT1, with Rohm 1/2" Drill Chuck, (1) Parlec C40-20ER612, Collet Holder and (1) Hertel HCV40ER20393, Collet Holder |
| 579. | (5) Assorted CAT-40 Toolholders, Including: (2) Command C4C4-0020, Collet Holders, (1) Command C4C3-0020, Collet Holder, (1) C40-1G100-3.25, Collet Holder, and (1) Command C4J4 with Jacobs 3JT, 1/2" Drill Chuck |
| 580. | Sharpe Model VH25, Vertical/Horizontal Milling Machine, 10" x 51" T-Slotted Table, 22" Longitudinal Table Travel, 17" Cross Table Travel, 19" Vertical Adjustment of Knee, Both Spindles are NST 40-Taper, Vertical Milling Specs: Variable Speeds: 60 to 4,500 RPm, SOny Millman 2-Axis DRO, Horizontal Milling Specs: 55 to 1,230 RPM, Coolant, One Shot Lube, Power Table Feed, 2 HP, Three Phase Motor and Controls, s/n 79120058, Approx: 72" x 72" x 92" and 4,500 Lbs R&R has quoted $150 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 581. | (6) Assorted CAT-40 Toolholders, Including: (1) Parlec C40-03JT1 with Rohm 1/2" Drill Chuck, (1) Command C4C5-0020 Collet Holder, (1) C40-EM1/2-2.63, End Mill Holder, (1) C40-EM5/8-3.75, End Mill Holder, (1) C40-3/4-3.75, End Mill Holder, and (1) Command C4P5-0001, End Mill Holder |
| 582. | (6) Assorted CAT-40 Toolholders, Including: (2) Command C4E5-0375, End Mill Holders, (1) Command C4E5-0250, End Mill Holder, (1) Command C4C4-0020, Collet Holder, (1) Command C4P5-0001, End Mill Holder, and (1) Parlec C40-03JT1 with Rohm 1/2" Drill Chuck |
| 583. | (3) Assorted CAT-40 Toolholders, Including: (1) Parlec C40-10SC3, Collet Holder, (1) Parlec C40-03JT1 with Rohm 1/2" Drill Chuck, and (1) C40CT-63 Adjustable Boring Head |
| 584. | (6) Assorted CAT-40 Toolholders, Including: (1) C40-EM3/4-3.75, End Mill, (1) Command C4P5-0001, End Mill, Hertel HCV40-EM025300, End Mill, (1) C40-EM1/2-2.63, End Mill, (1) Collis 67691-01, End Mill, and (1) Unknown End Mill Holder |
| 585. | (5) Assorted CAT-40 Toolholders, Including: (1) Hertel HCV40ER20590, End Mill, (3) Command C4C5-0020, Collet Holders, and (1) SYIC-23666 SBL20-2.5", Collet Holder |
| 586. | (5) Assorted CAT-40 Toolholders, Including: (1) Accupro 1-1/4-4.00", End Mill, (1) Kennametal CV40TG150488, Collet Holder, (2) C40-TG100-3.25, Collet Holders, and (1) Collis 40CV100SA, Collet Holder |
| 587. | (6) Assorted CAT-40 Toolholders, Including: (1) Narex WE1-50, End Mill Holder, (1) Parlec C40-20ER612, Collet Holder, (3) Command C4C5-0020, Collet Holders, and (1) Parlec C40-03JT1 with Rohm 5/8" Drill Chuck |
| 588. | (6) Assorted CAT-40 Toolholders, Including: (1) Hertel HCV40ER2020590, Collet Holder, (1) SYIC-23666 SBL20-2.5, Collet Holder, (1) C40EM1/2-2.63, End Mill Holder, (1) C40-TG100-325, Collet Holder, (1) Command C4C4-0020, Collet Holder and (1) C40-JT6-1.50 with Jacobs 1/2" Drill Chuck |
| 589. | (6) Assorted CAT-40 Toolholders, Including: (1) C40-ER20-6.00, Collet Holder, (1) Command C4P5-0001, End Mill Holder, (1) Command C4C3-0032, Collet Holder, (1) Parlec C40-10SC5, Collet Holder, (1) Parlec C40-03JT1 with Rohm 5/8" Drill Chuck, and (1) C40-TG100-3.25, Collet Holder |
| 590. | Nakamura-Tome Model Slant Jr, CNC Chucking Turning Center, 15.75" Swing Over Slide Covers, 11.02" Swing Over Saddle, 11.81" Maximum Turning Length, 1-5/8" Round Bar Capacity, 2.17" Hole Thru Spindle, 10-Position Turret, 4,500 Maximum RPM, Fanuc O-T CNC Controls, Tape Reader, Coolant, Chip Conveyor, Foot Control, 6" 3-Jaw Chuck, 10 HP, Three Phase Motor and Controls, s/n 11315, Approx: 110" x 52" x 65" and 5,700 Lbs R&R has quoted $300 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 591. | Moved to Lot #625Arbor Support for Milling Machine |
| 592. | Metal Frame, Wood Top Workbench, 36" x 30" x 31-1/2" with 2-3/4" Thick Top, Includes (2) Door Wood Cabinet with 3-Shelves, Including Contents of Assorted Nuts, Bolts, Brass Tubing and More |
| 593. | (4) Assorted Slide Hammer Type Morse Taper Drill Knock-Out Tools |
| 594. | Coolant Thru Insert Type Spade Drill |
| 595. | 28-Drawer Parts Bin with Assorted Diee Casting Mold Pins As Shown |
| 596. | (2) Kant-Twist Clamps, Including: (1) 12" and (1) 2" |
| 597. | Steel Cabinet with 5-Shelves, Including Contents of Assorted Welding Rod, End Mills, Drills, Chuck Jaws, Reamers, and More |
| 598. | (3) Coolant Thru Toolholders for Nakamura Turning Center, Including The Following Models: M2280, M2481, and M2228 |
| 599. | (3) Coolant Thru Toolholders for Nakamura Turning Center, Including The Following Models: M2280, M1283, and M2226 |
| 600. | Special Drilling Machine, Multiple Spindle Head, 27-1/2" x 36-1/2" Plain Production Table, 11-1/2" Throat, 7" Quill Travel, 24" Maximum Under Spindle, Commander 8-Spindle Attachment, Coolant, Palm Controls, Approx 2HP, Three Phase R&R has quoted $100 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 601. | (5) Assorted Coolant Thru Tool Holders for Nakamura Turning Centers, Including:M2280, M1283, NC 52.3016 5/8", M2226, and M2483 |
| 602. | (3) Assorted Coolant Thru Tool Holders for Nakamura Turning Center, Including: (1) M2280, (1) m1283, and (1) NC 52.3025 1" P1 |
| 603. | (4) Assorted Drill Chucks, Including: (1) Jacobs 14N, 1/2" Capacity, (1) 34-02, 1/2" Capacity, (1) Other Jacobs Drill Chuck, and (1) Hand-Tite Drill Chuck |
| 604. | (6) Assorted Collets |
| 605. | (15) Assorted TG100 Collets with Sizes Between 1/4" and 1" |
| 606. | (3) Assorted Live Centers, Including: (1) Riten with Morse Taper Shank, (1) Unknown on Morse Taper Shank, and (1) Other Unknown |
| 607. | (5) Assorted New and Used Collets, Including: (2) 150TG1500, (1) 16C 9/16" and (1) 3/16" |
| 608. | Assorted Collets, Including 16C, 5C, and More |
| 609. | Over (50) Assorted Type and Size Collets |
| 610. | Charmilles Model E110 "Eledorada", Sinker Type Electrical Discharge Machine, 13.8" x 9" Table, 7.9" Longitudinal Travel, 4.7" Cross Table Travel, 220 Lb Maximum Table Load, 21" x 14" x 8" Inside Tank Dimensions, 9.5" Workhead Backslide Travel, 3.9" Quill Travel, System 3R Type Electrode Holder, 5" x 10" Permanent Magnetic Chuck, Charmilles IsoPulse P25 Power Supply, Microfin P12-25 Controls, Vidmar Maple Top Bench and Cabinet Base, s/n 54565, Approx: 62" x 31" x 80" and 1,800 Lbs R&R has quoted $200 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 611. | Over (20) Assorted Collets |
| 612. | (11) Assorted Collets |
| 613. | Kitagawa Model HOH-06K, 6-1/2", 3-Jaw Chuck |
| 614. | MMK 6-1/2" 3-Jaw CNC Chuck |
| 615. | Kitagawa Model HOH-06, 6-1/2", 3-Jaw Chuck |
| 616. | Model HA5-6V.6409, 6-1/2", 3-Jaw Chuck |
| 617. | Metal Framed Desk With 4 Drawers And One Adjusting Metal Shelf With Wood Laminate Top, 60" x 20" x 29 1/2". |
| 618. | Wood Laminate Desk With 4 Drawers, 60" x 30" x 30", Wood Laminate Computer Desk 43" x 38" x 24" With Upper Shelf And Metal Framed Cloth Roller Chair. |
| 619. | 1 Lot With One Glass Top Table 48" x 20" x 16" Including Wood Laminate Movable TV Stand With 2 Pull Out Drawers And 2 Doors 28" x 20" x 42". |
| 620. | New 2001Excel Model SMT-350, CNC Vertical Machining Center, (2) 19.6" x 10.2" T-Slotted Pallets, 13.7" X-Travel, 9.8" Y-Travel, 9.8" Z-Travel, 176 Lb Pallet Load Capacity, 14.96" Throat Depth, 16.1" Maximum From Spindle to Pallet, BT-30 Spindle Taper, 150 to 15,000 RPM Spindle, 20-Tool Automatic Tool Changer, Fanuc 21-M CNC Controls, Full Enclosure, Coolant, Chip Auger, High Pressure Coolant, 5 HP, Three Phase Motor and Controls, s/n ES350290T, Approx: 58" x 119" x 82" and 6,700 Lbs R&R has quoted $350 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 621. | 1 Wood Conference Table With 8 Wood Framed Cloth Chairs, Table 112" x 40" x 29". |
| 622. | Acer Veriton M460 Computer With Intel E2180 Dual Core Processor 2 @ 2Ghz, 160GB SATA Drive, 1GB DDR2 RAM, DVD/RW Drive With Lightscribe, Windows XP Professional SP3, Includes Microsoft Office 2007 Professional Plus, Samsung 953BW 19" Widescreen LCD Monitor, 5ms ,Contrast Ratio 8000:1, Keyboard And Mouse. SN PSV520Z0078230BA552702. (Hoff-Hilk Does Not Guarantee The Transferability Of Software On Any Computers, If Applicable Please Contact Manufacturer Prior To Bidding.) |
| 623. | 1 Wood Conference Table With 8 Wood Framed Cloth Chairs, Table 96" x 42" x 29". |
| 624. | 1 Metal Framed Desk With 5 Drawers And Wood Laminate Top 60"x x30" x 29" With Cloth Chair on Casters, 1 Vertical File Cabinet With 4 Drawers 15" x 28" x 52". |
| 625. | Van Norman Model 2R3-28, Universal Milling Machine, 12" x 50" T-Slotted Table, 24" Longitudinal Table Travel, 12" Cross Table Travel, 19" Vertical Knee Adjustment, 6-Table Down Feeds, 50-Taper Spindle, 16-Spindle Speeds: 55 to 2,000 RPM, Universal Head, Head Swivels 90 Degrees, s/n na, with Arbor Support, Please Note: Not in Service, Approx: 74" x 74" x 76" and 4,000 Lbs R&R has quoted $150 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 626. | Wood Laminate Desk With 5 Drawers 60" x 30" x 29" With Metal Framed Cloth Chair On Casters And Wood Book Shelf With 4 Shelves 24" x 12" x 73". |
| 627. | Hewlett Packard LaserJet 4 Plus Printer, SN VSFB171122 On Wood Table 23" x 20" x 18". |
| 628. | Acer Veriton M460 Computer With Intel E2180 Dual Core Processor 2 @ 2Ghz, 160GB SATA Drive, 1GB DDR2 RAM, DVD/RW Drive With Lightscribe, Windows XP Professional SP3, Includes Microsoft Office 2007 Professional Plus, Samsung 953BW 19" Widescreen LCD Monitor, 5ms ,Contrast Ratio 8000:1, Keyboard And Mouse. SN PSV520Z0078230BACA2702. (Hoff-Hilk Does Not Guarantee The Transferability Of Software On Any Computers, If Applicable Please Contact Manufacturer Prior To Bidding.) |
| 629. | Wood Laminate Desk With 5 Drawers60" x 30" x 29", With Plastic Framed Cloth Roller Arm Chair. |
| 630. | Carlton 4' 9" Radial Arm Drill, 29" x 45" T-Slotted Base Table, 51" Maximum Under Spindle, No. 5 Morse Taper Spindle, 12-Spindle Speeds: 60 to 1,500 RPM, 6-Power Down Feeds: .06 to .25, Power Elevation, Electric Clamping, Coolant, 5 HP, Three Phase Motor and Controls, s/n 3340, Approx: 86" x 34" x 96" and 6,500 Lbs R&R has quoted $200 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 631. | 1 Lot With 2 Vertical Filing Cabinets 1 With 2 Drawers 15" x 26 1/2" x 28" ND 1 4 Drawer HON 15" x 25" x 50" And 1 Wood 2 Adjustable Shelf Book Shelf 36" x 12" x 48". |
| 632. | Wood Laminate Desk With 5 Drawers 60" x 30" x 29", 1 Metal Framed Laminate Top Table 60" x 30" x 30" And 1 Plastic Framed Roller Cloth Arm Chair. |
| 633. | 3 HON Vertical File Cabinets, 2- 2 Drawer 15" x 26 1/2" x 29", 1- 4 Drawer 15" x 25" x 49". |
| 634. | Acer Veriton M460 Computer With Intel E2180 Dual Core Processor 2 @ 2Ghz, 160GB SATA Drive, 1GB DDR2 RAM, DVD/RW Drive With Lightscribe, Windows XP Professional SP3, Includes Microsoft Office 2007 Professional Plus, Samsung 953BW 19" Widescreen LCD Monitor, 5ms ,Contrast Ratio 8000:1, Keyboard And Mouse. SN PSV520Z0078230BA442702. (Hoff-Hilk Does Not Guarantee The Transferability Of Software On Any Computers, If Applicable Please Contact Manufacturer Prior To Bidding.) |
| 635. | 1 Wood Book Shelf With 3 Adjustable Shelves 12" x 36" x 71", 1 Watson 4 Drawer File Cabinet 15" x 25" x 52", 1 Wood Laminate Roller TV Stand 25" x 16" x 21 1/2" With Sanyo VCR Model VHR-9280. |
| 636. | Wood Laminate Desk With 5 Drawers 60" x 30" x 30" With Plastic Framed Roller Cloth Arm Chair. Metal Framed Wood Laminate Top Table 62" x 30" x 30". |
| 637. | 2 HON 2 Drawer Vertical File Cabinets 15" x 26 1/2" x 30". |
| 638. | 2 HON 4 Drawer Vertical File Cabinets 15" x 25" x 52". |
| 639. | Acer Veriton M460 Computer With Intel E2180 Dual Core Processor 2 @ 2Ghz, 160GB SATA Drive, 1GB DDR2 RAM, DVD/RW Drive With Lightscribe, Windows XP Professional SP3, Includes Microsoft Office 2007 Professional Plus, Samsung 953BW 19" Widescreen LCD Monitor, 5ms ,Contrast Ratio 8000:1, Keyboard And Mouse. (Hoff-Hilk Does Not Guarantee The Transferability Of Software On Any Computers, If Applicable Please Contact Manufacturer Prior To Bidding.) |
| 640. | Hobart DialArc Type Welding Supply, Approx 250-Amp Output, Electrode Holder, Ground Clamp, Single Phase, on Cart, s/n na R&R has quoted $50 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 641. | 1 Wood Laminate 6 Drawer Desk 60" x 30" x 30" With Plastic Frame Roller Cloth Arm Chair, With 1 HON 2 Drawer File Cabinet 15" x 26 1/2" x 30". (Phone Not Included) |
| 642. | 2 Metal Vertical Floor Lamps 71" Tall And 1 Wood Bookshelf With 2 Adjustable Shelves 36" x 12" x 48". |
| 643. | 3 Assorted Wall Art In Frames. |
| 644. | Achiever SCS6 Paper Shredder 12 Sheet Capacity 10" Maximum Wide Paper. |
| 645. | Ex-Cell-O Model 602, Vertical Milling Machine, 9" x 42" T-Slotted Table, 22-1/2" Longitudinal Table Travel, 14" Cross Table Travel, 12" Vertical Knee Adjustment, 6" Quill Travel, Kwik-Switch II Spindle Taper, Variable Spindle Speeds: 85 to 4,000 RPM, 3-Spindle Feeds: .0015", .006", and .003", 2 HP, Three Phase, s/n 6029904, Please Note: Not in Service, Approx: 60" x 63" x 81" and 2,500 Lbs R&R has quoted $100 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 646. | (3) Assorted Command BT-30 Toolholders, Including: (1) B2J4-0033, with Jacobs Keyless Chuck, (1) B2C4-0020 Collet Holder, and (1) B2C4-0020 Collet Holder |
| 647. | (3) Assorted Command BT-30 Toolholders, Including: (1) B2E4-0001 End Mill Holder, (1) B2C4-1000, Collet Holder, and (1) Jacobs JKP-100-J33 with Keyless Chuck |
| 648. | (4) Assorted Command BT-30 Toolholders, Including: (3) B2C4-0020 Collet Holders and (1) B2C4-0020 Collet Holder |
| 649. | (3) Command B2C4-0020, BT-30 Collet Toolholders |
| 650. | Pratt & Whitney Model Tape Mate, Vertical Drilling and Tapping Machine, 25.6" x 15" T-Slotted Table, 20" X-Travel, 15" Y-Travel, 8.5" Z-Travel, 440 Lb Maximum Table Load, 15.5" Maximum From Spindle Nose to Table Surface, 3/4" Maximum Drilling in Mild Steel, 1/8" to 5/8" Diameter Maximum Tapping Capacity in Mild Steel, 30-Taper Spindle, 6,000 Maximum RPM, Fanuc System 3M CNC Controls, Table Guards, Coolant, RS232 Port, Approx 7-1/2 HP, Three Phase Motor and Controls, s/n F-420312, Approx: 72" x 86" x 80" and 5,000 Lbs R&R has quoted $200 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 651. | (3) Assorted Command BT-30 Toolholders, Including: (1) B2E2-0001 with Tapping Head, and (2) B2C4-0020 Collet Holders |
| 652. | (2) Assorted Command BT-30 Toolholders, Including: (1) B2E2-0001 with Tapping Head, and (1) B2J4-0033 with Jacobs JKP-100-J33 Keyless Drill Chuck |
| 653. | Acer Veriton M460 Computer With Intel E2180 Dual Core Processor 2 @ 2Ghz, 160GB SATA Drive, 1GB DDR2 RAM, DVD/RW Drive With Lightscribe, Windows XP Professional SP3, Includes Microsoft Office 2007 Professional Plus, Samsung 953BW 19" Widescreen LCD Monitor, 5ms ,Contrast Ratio 8000:1, Keyboard And Mouse. SN PSV520Z0078230BA4B2702. (Hoff-Hilk Does Not Guarantee The Transferability Of Software On Any Computers, If Applicable Please Contact Manufacturer Prior To Bidding.) |
| 654. | Wood Laminate Desk With 4 Drawers 60" x 30" x 29" With Plastic Frame Roller Cloth Chair, 1 Wood Laminate Book Shelf With 4 Adjustable Shelves 24" x 12" x 73". |
| 655. | Heavy-Duty Double End Pedestal Grinder, 10" Wheel Capacity, 1,745 RPM, 5 HP, Three Phase Motor and Controls, s/n na, Approx: 38" x 23" x 52" and 500 Lbs |
| 656. | Over (25) Sets Of Assorted Chuck Jaws. |
| 657. | Wood Laminate Desk With 5 Drawers 60" x 30" x 29" With Plastic Framed Roller Cloth Arm Chair. |
| 658. | 2 Vertical File Cabinets With 4 Drawer, 1 HON File Cabinet 15" x 25" x 52". |
| 659. | Lot of (3) Vertical File Cabinets, (2) HON 15" x 25" x 52" And (1) Globe 15" x 27" x 54". |
| 660. | Special Drilling and Tapping Machine, 2-Vertical Aro Pneumatic Tapping Heads, 1-Self Feed Company Tapping Head, 1-Horizontal Drilling Head, 23-1/2" x 76" Table, Swivel Fixture for Horizontal Heads, Coolant R&R has quoted $100 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 661. | 3M Overhead Projector Model 9000AJB. |
| 662. | Acer Veriton M460 Computer With Intel E2180 Dual Core Processor 2 @ 2Ghz, 160GB SATA Drive, 1GB DDR2 RAM, DVD/RW Drive With Lightscribe, Windows XP Professional SP3, Includes Microsoft Office 2007 Professional Plus, Samsung 953BW 19" Widescreen LCD Monitor, 5ms ,Contrast Ratio 8000:1, Keyboard And Mouse. SN PSV520Z0078230BA4E2702. (Hoff-Hilk Does Not Guarantee The Transferability Of Software On Any Computers, If Applicable Please Contact Manufacturer Prior To Bidding.) |
| 663. | Mayline 5 Drawer Blueprint File Cabinet 53 1/2" x 42" x 16". |
| 664. | Lot Of (3)- 2 Drawer File Cabinets 2 Legal Size 18" x 29" x 29", 1 Standard 15" x 28" x 29", 1 Wood Book Shelf With 4 Non Adjustable Shelves 25" x 12" x 72". |
| 665. | Lot Of (4) Floor Fans, 3 Vertical And 1 Box Fan. |
| 666. | HP Storage Works DAT160USB. |
| 667. | Epson ELP-3300 Projector. |
| 668. | (3) Assorted Vertical Filing Cabinets (2) 4- Drawer 15" x 27" x 52" And (1) 15" x 30" x 42". |
| 669. | (4) Assorted Okidata Microline Printers Includes (1) 390 Plus 24-Pin Printer, (1) 321 9-Pin Printer And (2) 391 Turbo 24 Pin Printer. |
| 670. | American Model TR-15-36 Vertical Broach, 15-Ton Normal Capacity, 19-Ton Maximum Capacity, 10" x 18-1/2" Tooling Area, 36" Stroke, 7" Cylinder Diameter, Variable Broaching Speed 18' to 28' Down per Minute, 11-1/2" Maximum Work Diameter, Coolant, Palm Buttons, 20 HP, Three Phase Motor and Controls, s/n 6665, Approx: 48" x 84" x 130" and 12,000 Lbs R&R has quoted $500 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 671. | Computer, Acer Aspire M5640 With Intel E2160 Dual Core Processor, 250GB SATA Drive, 3GB DDR2 RAM, DVD/RW Drive, 14 In 1 Memory Card Reader, Samsung 953BW 19" Widescreen LCD Monitor, 5ms, Contrast Ratio 8000:1, Keyboard And Mouse. (Hoff-Hilk Does Not Guarantee The Transferability Of Software On Any Computers, If Applicable Please Contact Manufacturer Prior To Bidding.) |
| 672. | Compaq Deskpro Tower, Intel P3 Processor With 15" Monitor And Keyboard. |
| 673. | Toshiba Copy/Fax Machine Model DP80F, SN 02120571. |
| 674. | HP Color LaserJet Printer Model 3500, SN CNBRK02310. |
| 675. | (5) Assorted 30-Taper Toolholders, Including: (1) Bristol Erickson BM15-885-075-1-085, Collet Holder, (2) Universal 911777, Collet Holders, (1) Erickson 10-885-188-1-085 Collet Holder and (1) Bristol-Erickson BM35-885-106-1-125 |
| 676. | (6) Assorted 30-Taper ToolHolders, Including: (1) Nikken TDC30-SK10-150, Collet Holder, (1) Parlec CH30-75EM3, End Mill Holder, (1) Erickson 10-885-188-1-085, Collet Holder, (1) Bristol Erickson 60-885-105-1-080 End Mill Holder, (1) ISO30EM End Mill Holder, and (1) Unknown End Mill Holder |
| 677. | (7) Assorted 30-Taper Toolholders, Including: (1) Parlec ISO30MT003, Morse Taper Holder, (1) Bristol Erickson 30-885-103-1-030 End Mill Holder, (1) Nikken TDC30-WE5/8-75, End Mill Holder, (2) Erickson 608851021080, End Mill Holders, (1) Parlec IS030SM100, Shell Mill Holder, and (1) ISO30EM, End Mill Holder |
| 678. | (5) Assorted 30-Taper Toolholders, Including: (1) Erickson 885-209-1-070, Collet Holder, (1) Universal 911777, Collet Holder, (1) Erickson 10-885-188-1-085 Collet Holder, (1) Bristol Erickson 189/BM 10-885-189-1-125 Collet Holder and (1) Morse Taper Tool Holder with Jacobs Drill Chuck |
| 679. | (6) Assorted 30-Taper Toolholders, Including: (1) Parlec ISO30SM100, Shell Mill Holder, (1) Erickson 60-885-102-1-083, End Mill Holder, (1) Erickson 60-885-103-1-080, End Mill Holder, (2) Erickson 60-885-104-1-080 End Mill Holders, and (1) Erickson 60-885-433-1-050 with Albrecht 3/8" Keyless Drill Chuck (Chuck is Cracked) |
| 680. | LeBlond Regal Engine Lathe, "Servo-Shift", 19" x 84" Rated Capacity, 19-1/4" Actual Swing Over Ways, 12-1/4" Swing Over Cross Slide, 84" Between Centers, 45 to 4,500 RPM, 1-3/4" Hole Thru Spindle, 48-Threads: 2 to 112 IPM, 48-Feeds: .059" to .0032", 12" 3-Jaw Chuck, 15" 4-Jaw Chuck, Tailstock, Steady Rest, Micro Carriage Stop, Hardways, Chip Pan, 10 HP, Three Phase Motor and Controls, s/n 8E-2724, Approx: 138" x 43" x 55" and 9,500 Lbs R&R has quoted $200 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 681. | (3) Assorted 30-Taper Toolholders, Including: (1) Parlec CH30-10SC3 with Hy-Pro 0-9/16 Tapper, (1) Erickson 60-885-103-1-080, End Mill Holder, and (1) BIG 30-U7/8 with Lidpo Tools Adjustable Boring Head |
| 682. | (3) Assorted 30-Taper Toolholders, Including: (1) Parlec ISO30EM750, End Mill Holder, and (2) Parlec CH30-10SC3, Collet Holders |
| 683. | (5) Assorted 30-Taper Toolholders, Including: (1) BIG 30-U7/8, (1) Erickson 60-885-433-1-050, with Albrecht 3/8" Keyless Drill Chuck, (2) Nikken TDC30-SU10-150, Collet Holders, and (1) ISO30EM, End Mill Holder |
| 684. | Assorted Computer Hardware Including But Not Limited To: RDM Label Printer Model EC7011F, HP Jetdirect EN3700, Modems, Mounting Hardware, Samsung VHS Camcorder Model SCF703, Brother Electric Typewriter Model SX-4000, Data Switches, Misc Cables, Printing Calculator. |
| 685. | Acer Veriton M460 Computer With Intel E2180 Dual Core Processor 2 @ 2Ghz, 160GB SATA Drive, 1GB DDR2 RAM, DVD/RW Drive With Lightscribe, Windows XP Professional SP3, Includes Microsoft Office 2007 Professional Plus, Acer P191W 19" LCD Monitor, Keyboard And Mouse. (Hoff-Hilk Does Not Guarantee The Transferability Of Software On Any Computers, If Applicable Please Contact Manufacturer Prior To Bidding.) |
| 686. | Contents Of Shelf, 3 Ring Binder, Plastic Letter Trays, And More. |
| 687. | Double Pedestal Conference Table With Laminated Wood, 47 1/2" x 142" x 29 1/2", And 10 Upholstered Wood Framed Chairs. (Computers Not Included) |
| 688. | Lot Of (2) Assorted Office Furniture, (1) HON Vertical 4- Drawer File Cabinet 15" x 25" x 52" And (1) 5 Shelf Bookshelf With 4- Adjustable Shelves 36" x 18" x 72". |
| 689. | Mutoh Drafting Machine Table And Workstation, Drafter LM Rail with Model Py-15 Adjustable Drafting Head, 12" x 18" Square, 180 Degrees, 120V Receptacle, Drawing Table Overall Size 54" x 84" x 32", Overall Desk Size 68" x 31" x 29" With 3 Drawers. (Computer Not Included) |
| 690. | Index Model 645 Vertical Milling Machine, 9" x 40-1/2" T-Slotted Table, 21" Longitudinal Travel, 12" Cross Table Travel, 16" Vertical Adjustment of Knee, 6" Quill Travel, R8 Spindle Taper, Belted Speeds: 80 to 2700 RPM, Power Longitudinal and Cross Feeds, One Shot Lube, 1 HP, Three Phase Motor and Controls, s/n 12233, Approx: 58" x 54" x 82" and 2,500 Lbs R&R has quoted $100 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 691. | HP XW4600 Workstation Computer With Intel Dual Core 2, DVD RW Lightscribe, SN 2UA8231LP0 eSATA Port, USB Ports, Keyboard, Mouse, Samsung 19"" LCD Monitor Syncmaster 953BW. |
| 692. | Compaq DeskPro P3 With 19" Monitor, Keyboard And Mouse. |
| 692A. | 1984 GMC Model TL D95, Tractor, Cab-Over Type, Tandem Axels, Eaton-Fuller Split Axle Transmission, Air Brakes, Diesel Powered Engine, 36" Sleeper Cab, Approx: 479,393 Miles, AC, VIN#1GDT9L4C3EV529036 Please Note: Brakes Need Work |
| 693. | Contents Of Room To Include: (7) Chairs, (1) 3 Shelf Bookcase, (1) Radiant Univision Slide Projector, (1) Weight Bench, (3) Golf Clubs, (1) Mirror, And More. |
| 694. | Computer, HP Proliant ML110 Server Tower With Xeon Processor @ 3Ghz, 2GB PC2-6400 RAM, (1) 80GB SATA Hard Drives, SATA DVDRom Drive, 14" Monitor, Keyboard And Mouse. SN USE826N61S. (Hoff-Hilk Does Not Guarantee The Transferability Of Software On Any Computers, If Applicable Please Contact Manufacturer Prior To Bidding.) |
| 695. | Assorted Office Furniture To Include: (1) 2 Shelf Bookcase 25 1/2" x 18" x 29", (1) HON 2 Drawer File Cabinet 15" x 25" x 29", (1) 5- Drawer Metal Desk With Wood Laminate Top 60" x 30" x 29" And (1) Table With 2 Drop Sides. |
| 696. | (10) Matching Upholstered Arm Chairs On Casters. |
| 697. | (10) Non- Matching Upholstered Arm Chairs On Casters. |
| 698. | (4) Mop Buckets And Mops And (2) Signs. |
| 699. | Computer, HP Proliant ML350 Server Tower With Xeon Processor @ 2Ghz, 4GB Of PC2-5300 Heatsinked RAM, (2) 250GB SATA Hard Drives With Raid Board, CDRom Drive, 14" Monitor, Keyboard And Mouse. SN USE826NCGM. (Hoff-Hilk Does Not Guarantee The Transferability Of Software On Any Computers, If Applicable Please Contact Manufacturer Prior To Bidding.) |
| 700. | New 2006Spectro Model SpectroMaXx, Stationary Metal Analyzer, 140 to 670 nm Effective Wave Length Range, Automated Profiling, Interchangable Spark Stand, Intergrated Shutter System for Optimum Plasma Viewing, 4 Kw Maximum Spark Power, Computer Tower, Keyboard, Flat Screen Monitor and Mouse, s/n 06000645 |
| 701. | (1) Iomega External SATA/USB 500GB Drive, PN 31718800, SN 44A808078B, And (1) Cisco Linksys Wireless N Broadband Router Model WRT160N SN CSE01H444588. |
| 702. | Iomega External SATA/USB 500GB Drive, PN 31718800, SN 44A8080787. |
| 703. | Dayton 15" Floor Scrubber Model 3Z665, SN 11463, 115/230V, 3/4HP, 1740RPM, 13/6Amp. |
| 704. | Dayton 20" Floor Buffer Model 3Z984, SN 02017, 115V, 1.5HP, 5A, 1725RPM, With Assorted New Pads. |
| 705. | Windsor Sensor S12 Upright Vacuum, 120V, 60hz, 10A, SN70078594, With Wand Attachment. |
| 706. | GE Refrigerator/Freezer Model CTX18LYYBRWH, Overall Dims 28" x 29" x 67". |
| 707. | Contents Of Closet To Include: Disposable Mops, Desk Mover (Missing Handle), Soap, Urinal Cakes, Deodorizers, Cleaners, And More. |
| 708. | Assorted Office Furniture To Include: (1) 5- Drawer Desk With Wood Laminate Top, (2) 2- Drawer Filing Cabinets, (1) 4- Shelf Bookcase And (1) Adjustable Chair With Arm Rest on Casters. |
| 709. | Lot Of Networking Supplies, (1) Partial Roll Of Cat6 Plenum Cable, (1) Partial Roll Of Cat5 Cable, (1) Ideal Ratchet Telemaster Crimper And Assorted Modular Plugs Approx 65 Cat5 Type. |
| 710. | Nissan Model KCPH02A25PV, LP Powered Fork Truck, 4,400 Lb Capacity, 187" Lift, 42" Tilting Forks, Side Shift, Automatic Transmission, Cushion Tires, Approx: 99XX Hours, s/n KCPH02AP907325 |
| 711. | Computer Tower, Monitor, Keyboard, Speakers, Brother HL-1440 Laser Printer And HP External HP Jetdirect 170X Print Server. |
| 712. | Lot Of Office Furniture Desk Dimensions Up to 60" x 31" x 56" Height, (1) Desk Metal 5 Drawer With Wood Laminate Top, (1) Desk Wood 4 Drawer, (1) Desk Metal 5 Drawer With Wood Laminate Top And Attached Metal Shelves, (2) 3- Shelf Bookcases, Wood Laminated, (1) Printer Stand And (3) Chairs. |
| 713. | New 5 Gallon Of Die Slick 930-C, GW Smith And Sons Product Code# 0930, Lot# 8635, NJTSRN# 31-0512-952-5043. |
| 714. | HP Designjet 755CM, SN ESA5900744, Model# C3198A, 140W, 2A, 120V, 36" Paper Roll Capacity, With Jet Direct Card. |
| 715. | 6 Assorted PC Towers And Assorted Keyboards. (Condition Unknown) |
| 716. | Hoover Upright Vacuum Model U5117-900, 120V, 60hz, 12A, With Removable Tool Rack. |
| 717. | Assorted Christmas Supplies. |
| 718. | HP Laserjet 5000N, SN USB1057378, With Jetdirect Card, 11" x 17" And 8 1/2" x 11" Paper Trays. |
| 719. | Compaq DeskPro P3 With 19" Monitor, Keyboard And Mouse. |
| 720. | Numerex Model 3636-18, DCC Measuring Machine, 60" x 48" x 10" Grey Granite No Lip Table, 36" X-Travel, 36" Y-Travel, 18" Z-Travel, Renishaw Model PH9A Probe Head with Renishaw Model PHC9 Mk2 Probe Head Control Unit, Renishaw Pendant Controls, Renishaw TP6 Touch Probe, Zeiss Joystick Controls, Trademark PC Tower, Monitor, Keyboard, Printer, and Desk, s/n X923, Measuring Machine Approx: 65" x 68" x 85" |
| 721. | (2) Assorted Bookshelves, Including: (1) Wood Laminate with 6-Adjustable Shelves, 36-1/4" x 11-3/4" x 84" and (1) Metal, with 2-Adjustable Shelves, 37-1/2" x 13-1/2" x 42" |
| 722. | Assorted Office Items Including: (1) Wood Office Institute Furniture, Wood 2-Drawer Office Desk, 60" x 32" x 30" and (1) 72" x 48" Corkboard |
| 723. | (3) Assorted 4-Drawer File Cabinets, All Approx: 15" x 25" x 52" |
| 724. | (5) Assorted Chairs, Including: (4) Roller Shop Office Chairs and (1) Folding Chair |
| 725. | (3) Assorted Okidata Dot Matrix Printers, Including: (2) Microlinee 320 and (1) Microline 321 with some Paper |
| 725A. | Removed by seller due to question of ownership Enclosed Semi-Truck Trailer, Approx 45' Long, 98" Wide, 103" Inside Height, Garage Type Door, Tandem Axle, with Welded on Diamond Plate Extension off back of Trailer, Approx 2' |
| 726. | Allen Bradley Data Collection and Control System Including the Following Components: Allen Bradley Cat No. 1770-TA Industrial Terminal with CRT and Keyboard, with 3-Channels, Allen Bradley Cat No. 1770-SB, Data Cartridge Recorder, Suitcase Type, and Allen Bradley Model SLC150 Programmable Controller |
| 727. | (2) Assorted Window Unit Air Conditioners, Including: (1) Fridigaire for 25-3/4" x 17-1/4" Opening, and (1) Hampton Bay, Please Note: Condition Unknown |
| 728. | Steel Wall Mount Cabinet, Single Door, Approx: 24" x 9" x 30" |
| 729. | Metal Frame, Wood Top Office Desk with 4-Drawers, Approx: 54" x 24" x 29-1/2" and (1) Computer Printer Stand, Laminate Wood, Approx: 24" x 21" x 28" |
| 730. | Nissan Model CPJ2A2SV, LP Powered Fork Truck, 4,050 Lb Capacity, 189" Lift, 41-1/2" Tilting Forks, Side Shift, Automatic Transmission, Cushion Tires, Controls for Transfer Ladle, Approx: 11,4XX Hours, s/n CPJ02-9V1018 |
| 731. | (2) Assorted Cannon Printers, Including: (1) Model IP1800, and (1) Pixma Scanner/Printer |
| 732. | Laminate Wood Office Desk, Including Contents: (2) Trademark Towers with CD Drives, (1) Set of Computer Speakers, APC Battery Back-up, (2) 20" Monitors and (1) 14" Monitor |
| 733. | (3) Assorted "Parts" Computer with Other Computer Related Components |
| 734. | Metal Frame, Wood Top Drafting Table, Adjustable Angle Top, 60" x 37-1/2" Top, with Hutch, 37-1/2" Tall |
| 735. | Inter-Tel Model Axxess, Phone System, with (5) Assorted Cards, Including: DKSC16+, DKSC, LSC, EVMC, and CPC, with 16-Assorted Inter-Tel Phones, Primarly Model 8520 |
| 736. | (3) Assorted Steel Organizers Includes (1) Credenza With 6- Drawers And Laminated Wood Top 48" x 24" x 29" And (2) 4- Drawer Vertical Filing Cabinets 14 3/4" x 28 1/2" x 52". |
| 737. | Contents Of Room Includes Fax/Copier Cleaning Kits, 3- Ring Binders, Ribbon Cartridges, Toners, Time Cards, Tape Guns, And More Office Supplies. |
| 738. | Cannon Copier, Imagerunner 3300, SN MPH50486, With (3) 8 1/2" x 11" Paper Trays And (1) 11" x 17" Paper Tray, 120V, 60Hz, 10A. |
| 739. | Self Dumping Hopper with Fork Sleeves, Lever Activated Release Latch, 57" x 40" Top Dimensions, 38" Tall, 41" x 49-1/2" Base, Contents Included |
| 740. | Quincy Recipricating Type Air Compresor, 15 HP, 120-Gallon Tank R&R has quoted $100 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 741. | Self Dumping Hopper with Fork Sleeves, Lever Activated Release Latch, 39" x 61" Top Dimensions, 40" Tall, 42" x 50" Base, Contents Included |
| 750. | Automatic Pallet Wrapper, 65" Diameter Powered Rotary Table, 20" Maximum Wrap Material Width, Manual Movement of Wrap Dispenser, Will Wrap up to 90" Height, Foot Pedal, Single Phase, s/n na |
| 751. | (14) Boxes of No. SF18X15V080HD, 19.0 Micron Strectch Wrap, 4-Rolls per Box |
| 752. | Steel Self Dumping Hopper, Approx: 57-1/2" x 62" x 39-1/2" |
| 753. | 6-Shelves of Multi-Spindle Drill Attachments and Accessories, Cabinet Included, Approx: 37" x 21" x 78" |
| 754. | Derson Mfg Steel Liquid Dispensing Tank, 79,600 Cu, 5 PSIG Pressure Testing, s/n 7510, Approx: 48" Diameter x 74" Long with Tuthill Transfer Series 900, Fil-Rite Meter |
| 755. | Approx (25) Jack Hammer Bits, 1-1/8" Shank and 20" Long |
| 756. | Removed by seller due to question of ownership Enclosed Semi-Truck Trailer, Approx 42' Long, 96" Wide, 107" Inside Height, 2-Door Rear Access, Tandem Axle |
| 760. | Komatsu Model FG35ST-6, LP Powered Fork Truck, Approx 6,500 Lb Capacity, 48" Tilting Forks, Side Shift, Automatic Transmission, Cushion Tires, Controls for Transfer Ladle, Approx: 90XX Hours, s/n na |
| 765. | Ace-Roto Mold, 2,600 Gallon Capacity Plastic Fluid Holding Tank, Cone Bottom, Mounted on Metal Stand, Approx 8' Diameter x 10' 6" Tall, with Pump, Please Note: Buyer Responsible for Fluid in Tank |
| 770. | Allegany Technology Model Champ 6K, Digital Crane Type Scale, 6,000 Lb Rated Capacity, Battery Powered, s/n 28405 |
| 775. | Ace-Roto Mold, 1,000 Gallon Capacity Plastic Fluid Holding Tank, Cone Bottom, Mounted on Metal Stand, Approx 6' Diameter x 9' Tall, Please Note: Buyer Responsible for Fluid in Tank |
| 780. | Clark American-Lincoln Model 505-404, Electric Floor Scrubber, Rider Type, s/n 650694 |
| 785. | Equipment Manufacturing Corp. Model 375GSS, Evaporator, Approx 375-Gallon Holding Tank, Approx: 63" x 32" x 48" Tank, Adjustable Temperature Controls, Blower Motor, 1-7/8" Lower Discharge, s/n 6170303, Approx: 80" x 58" x 84" |
| 790. | Knox and Norton, Hydraulic Unit, 10HP, Three Phase Motor and Controls, s/n 80246 R&R has quoted $75 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
| 800. | Tennant Model 465, Electric Floor Scrubber, Self Propelled, Walk Behind Type |