Hoff-Hilk Auction Services
Alpha Power & Technology - Thursday, September 9, 2010 Thursday, September 23, 2010 - Starting at 10:00am (CDT)

Item Description
1.Master-Fab Model RC1510 Hydraulic Press Brake. 150-Ton Rated Capacity, 10' Bed and Ram, 102" Between Housings, 10" Throat, 24" 2-Axis Rear Back Gage with ASAP CNC Simple Touch Control, Lower Die Holder, 480 Volt 3-Phase Motor and Controls, s/n: 85-2-861. Approx 120"x80"x105"

Note: Dies seen in photos not included.

Video Available. Click on lot to view

Dynamic Rigging has quoted $950 to load this item during scheduled removal days. Please call Tracey with rigging related questions 612-210-2499.

2.Gardner-Denver "Electra-Screw" Model EBECED Air Compressor. Rotary Screw Type, 22,047 Indicated Hours, 100psi Max, 20HP 460 Volt 3-Phase Motor and Controls, s/n: A9CAAAC. Approx 62"x35"x37"
3.Laminated Wood Conference Table. 12'x4'
3.1.Please click on this lot for Rigging Information.
3.3.This auction features EXTENDED BIDDING! View this lot to learn more.
3.4.How much time is left?
3.5.This auction STARTS TO CLOSE at 10:00 AM CDT at a rate of 2 lots per minute. Click this lot to learn more.
3.6.Click on this lot to learn more about preview dates and times.
3.7.Click on This Lot For Important Removal Information
3.8.Hoff-Hilk Auction Services will charge a 15% Buyer's Premium on all items at this sale. Click on this lot for more information.
4.Esab Model PCM-500i Plasma Cutter. 35 Amp 120 Volt Rated Output @ 40% Duty Cycle, 200/230 Volt Single Phase Input, Torch, Ground Clamp, Rolling Bench, s/n: PG-1842166.
5.Whitney Trambeam Rolling Gantry. 5-Ton Rated Capacity, 15' Under Beam, 22' Beam Length, (2) Trolleys, s/n: 89417 26.

Dynamic Rigging has quoted $300 to load this item during scheduled removal days. Please call Tracey with rigging related questions 612-210-2499.

6.Roper-Whitney Model 3116G Power Bending Roll. 16-Gage X 36" Rated Capacity in Soft Steel, 3" Roll Diameter, Forward/Reverse Drum Switch, 3-Phase Motor and Controls, s/n: 126-11-79. Approx 62"x24"x42"
7.(5) 208 Volt 400 Watt Lights
8.Clark Model 2348144 Fork Truck. Gasoline Powered, 15,000 lb Rated Capacity, 17' Lift, Pneumatic Tires, Cab with Heat, 6" Wide Forks with 7' Extensions, Hand Crank Fork Positioner, 145" Closed Height, s/n: 2348144FT110. Note: Cab doors included.

Video Available. Click on lot to view

9.Rolling Safety Stair. 133" Top Step Height, 24" Wide Treads.
10.Venmar Model HEPA-1000 HEPA Filter. 120 Volt, s/n: H108030706521. Approx 17"x24"x30"
11.2007 Miller Model Millermatic 251, Stock No. 903868 Welding Power Source. 200-Amp, 28 Volt Rated Output @ 60% Duty Cycle, Built-In Wire Feeder, Gun, Ground Clamp, On Wheels, 200/220 Volt Single Phase Input, s/n: LH061918B. Approx 20"x40"x33"
12.Loctite Model 980500 6" U.V. Conveyor. Approx 6"x3" Window, 44" Tunnel Length, On Wheels, 220 Volt 1-Phase, s/n: 9571661. Approx 86"x33"x56"
12.1.1986 Ford F7000 Dock Truck. 386,716 Indicated Miles, 8.2L Detroit Diesel Engine, 5-Speed Manual Transmission, 23,100 lb. GVWR, 24'x92"x98" Box, 2,000 lb. Capacity Lift Gate, Decal Signage, VIN: 1FDNK74N3GVA52472
13.A-Frame Style Rack on Wheels. Approx 10'x5'x87"
14.Assorted Scaffolding Components Including: (4) 48"x29" Frames, (2) 48"x51 1/2" Frames, (4) Werner Model 5610-19 Aluminum Planks, 50 lb/ Square Foot, and (6) Braces.
15.Rolling Metal Bench with Lower Shelf, 8" Wheels and Pro-Reel Cord Reel. Approx 85"x31"x32 1/4"
16.2003 Euromac Model BX1250/30 Single Station CNC Punch. 30-Ton Capacity, 39.37" Y-Axis, 49.2 X-Axis, 200 SPM Max Hit Rate with 20mm Pitch, 450 SPM Max Nibbling Rate, .020" to .394" Thickness Range, 3-Phase Motor and Controls, s/n: BX102502A. Approx 90"x120"x77"

See item 42 for punches and dies.

Video Available. Click on lot to view.

Dynamic Rigging has quoted $850 to load this item during scheduled removal days. Please call Tracey with rigging related questions 612-210-2499.

17.Louisville Part No. 911227 Rolling Safety Stair. 48" Top Tread Height, 24" Wide Treads.
18.6,000-Gallon Stainless Steel Tank with Pumping System. Designed For Use with Formaldehyde but Never Used. 8' Diameter, 18' Tall. Non-Magnetic Stainless Steel Must be Removed Through 8'x11' Opening in Exterior Wall OR (2) Interior Walls May Be Demolished. Tank May Need to be Cut. Buyer responsible for all aspects of removal including capping utility lines, debris removal and returning exterior wall/roof to a weather-tight condition. Hoff-Hilk Auction Services strongly recommends that interested bidders inspect the tank and its location within the building. Winning bidder will have until September 30th to remove this item.
19.Rolling Metal Bench with 5" Wheels Approx 96 1/4"x30 1/4"x33 1/2"
20.Rolling Metal Bench with 4" Wheels. Approx 84 1/2"x35 1/2"x40 1/2"
21.2006 Miller Model Spectrum 2050 Plasma Cutter. 55-Amp, 110 Volt Output @ 60% Duty Cycle, Torch, Ground Clamp, s/n: LG100115P. Approx 13"x21"x17"
22.Ingersoll-Rand Model DXR100 Refrigerated Compressed Air Dryer. 130F Max Inlet Temp, 250psi Max Inlet Pressure, 40F to 120F Ambient Temp Range, R134A Refrigerant, 1/2HP 115 Volt Motor, s/n: 96DDXR1975. Approx 36"x22"x35"

Dynamic Rigging has quoted $75 to load this item during scheduled removal days. Please call Tracey with rigging related questions 612-210-2499.

23.(10) Rolling Office Chairs with Arms.
24.Pro-Notch Sheet Metal Notcher. 34"x31" T-Slotted Table, (2) Adjustable Guides, Remote Foot Switch, 480 Volt 3-Phase Motor and Controls, s/n: na. Approx 43"x40"x40"

Dynamic Rigging has quoted $75 to load this item during scheduled removal days. Please call Tracey with rigging related questions 612-210-2499.

25.A-Frame Style Rack on Wheels. Approx 125"x60"x87"
25.1.151" 20,000 lb Capacity Spreader Bar
26.(5) 208 Volt 400 Watt Lights
27.12'x3 1/4"x3 1/4" 4-Way Lower Press Brake Die.
28.Johnson Model J Horizontal Band Saw. 10"x18" Capacity in Flats, 10" Capacity in Rounds, (4) Belted Blade Speeds, 1"x11' 6" Blade Size, 1 1/2 HP 208-220/440 Volt 3-Phase Motor and Controls, s/n: H20934. Approx 67"x33"x48"

Dynamic Rigging has quoted $100 to load this item during scheduled removal days. Please call Tracey with rigging related questions 612-210-2499.

29.10'x3 1/4"x3 1/4" 4-Way Lower Press Brake Die
30.(3) Matching Lower Press Brake Die Segments. Approx 130" Total Length.
31.Miller Model Maxtron 300 CC/CB DC Inverter Welding Power Source. 300-Amp 32 Volt Rated Output @ 100% Duty Cycle When Connected to 3-Phase, 225 Amp, 29 Volt Rated Output When Connected to Single Phase, 230/460 Volt 1/3 Phase Input, s/n: JK714246. Includes Miller Model WR Extended Reach Wire Feeder with Gun, s/n: JK727162.
32.Wysong Model 1010-RD Power Squaring Shear. Mechanical Type, 10'x10GA Rated Capacity, 8' Squaring Arm, 26" Front Operated Rear Power Back Gage, 30" and 25" Front Sheet Supports, 7.5HP 230/460 Volt 3-Phase Motor and Controls, s/n: 1320949. Approx 170"x156"x112" and 13,500 lbs.

Video Available. Click on lot to view

Dynamic Rigging has quoted $950 to load this item during scheduled removal days. Please call Tracey with rigging related questions 612-210-2499.

33.(2) Upper Press Brake Dies: (1) 32 1/2" Gooseneck and (1) 34" Standard.
34.Segmented Goose Neck Press Brake Die. Approx 117" Total Length, 1 1/2" to 29 1/4" Segment Lengths.
35.10' Lower Press Brake Die Holder.
35.1. Roof Repaired by Owner 1999 GMC C6500 Dock Truck. 212,xxx Indicated Miles, Caterpiller 6-Cylinder Turbo Diesel Engine, 5-Speed Manual Transmission, Air Conditioning, 25'x97 1/2"x92" Inside Box, Side Access Cargo Door, Non-Functional Lift Gate, 25,950 GVWR, VIN: 1GDJ7H1C4XJ502775
36.Segmented Upper Press Brake Die. Approx 79 3/4" Total Length, 3/4" to 23 3/4" Segment Lengths.
37.(3) Matching Lower Press Brake Die Segments. Approx 120 1/4" Total Length.
38.10' Gooseneck Press Brake Die
39.12' Gooseneck Press Brake Die.
40.White Fork Truck. Estimated 8,000 lb. Capacity, 97" Lift, 5"x48" Forks, 88" Closed Height, Cage, Cushion Tires, s/n: na. Note: Tank not included.

Video Available. Click on lot to view

41.Airco Model CV-200II Welding Power Source. 200-Amp, 28 Volt Rated Output @ 100% Duty Cycle, Airco Wire Feeder with Tweco MIG Gun, Ground Clamp, On Wheels, 208/230/460 Volt 3-Phase Input, s/n: RG710347. Approx 22"x44"x58"
42.Large Assortment of Punches and Dies Including Rounds From .140" to 1.250" Ovals Up To .406"x.812" Squares Up To .875" with Rolling Metal Rack.
43.Rolling Metal bench with Lower Shelf and 4" Wheels. Approx 60 1/2"x30 1/4"x41 1/4"
44.Rolling Metal Bench with Lower Shelf and 4" Wheels. Approx 84"x30"x41"
45.Rolling Safety Stair with 60 1/4" High Top Step and 24" Wide Treads.
45.1.Strippit Model Sonic 18/30 Single Station Punch. 30-Ton Capacity, 19" Throat, 1/4" Maximum Material Thickness, 165 SPM, 5 13/32" Shut Height, 3 1/2" Maximum Hole in 3/32" Mild Steel, 3/4" Maximum Hole in 1/4" Mild Steel, Assorted Tooling, Remote Foot Switch, 3-Phase Motor and Controls, s/n: na. Approx 36"x48"x72" and 3,500 lbs.

Video Available. Click on lot to view.

46.Rolling Metal Bench with Lower Shelf and 5" Wheels. Approx 84"x30 1/8"x37 1/2"
47.Kenmore Washer and Electric Dryer. 299"x25 1/2" Each.
48.Paint Booth Ban. 24" Diameter, 208-230/460 Volt 3-Phase Motor.
49.Rolling metal Bench with Lower Shelf, 4" Wheels and Welded Fixture. Approx 83 7/8"x30"x40"
50.Rolling Metal Bench with 4" Wheels. Approx 84 1/2"x36"x41 1/4"
51.(5) 208 Volt 400 Watt Lights
52.Pair of 6' Fork Extension. 5 1/4"x2" Pocket.
53.Federal Pacific Catalog No. T4T15E Transformer. 15KVA, 480 Volt Primary, 208/120 Volt Secondary, 3-Phase, 210lbs, Approx 17"x19"x29"

Dynamic Rigging has quoted $75 to load this item during scheduled removal days. Please call Tracey with rigging related questions 612-210-2499.

54.HP Model C2848A DesignJet 600 Plotter. 36" Capacity, Roll/Sheet Feed, RS-232 and Parallel Input, Rolling Stand, s/n: ESC4410924.
55.151" 20,000 lb Capacity Spreader Bar