 |
|
| |
|
Hoff-Hilk Auction Services
Central Lakes College 2009 - Thursday, December 3, 2009 Thursday, December 17, 2009 - Starting at 10:00am CST
| Item | Description |
| 1. | Evinrude Model E90FPLSNF Outboard Motor. 90HP, 29" From Transom to Center of Shaft, No Prop, S/N: 04994752. Note: Purchased new and used for demonstration purposes only. Never disassembled or put in the water. Manual included. |
| 2. | Miller Model DeltaWeld 450 Constant Potential DC Welding Power Source. 450 Amp 38 Volt Rated Output @ 100% Duty Cycle, Automatic 1D(S) Wire Control, 230/460 Volt 3-Phase Electrics, S/N: JG139549. Appox 22 1/2"x36 1/2"x47" |
| 3. | The Boss "Power V" Snow Plow. 7' 6" Wide, Swivel/Lift, Lights, Mounting Brackets and Control, S/N: 36319 |
| 3A. | Please click on this lot for Rigging Information. |
| 3B. | UPS Shipping Available for small items Click here for more information. |
| 3C. | This auction features EXTENDED BIDDING! View this lot to learn more. |
| 3D. | How much time is left? |
| 3E. | This auction STARTS TO CLOSE at 10:00 AM CDT at a rate of 3 lots per minute. Click this lot to learn more. |
| 3F. | Click on this lot to learn more about preview dates and times. |
| 3G. | Click on This Lot For Important Removal Information |
| 4. | 50HP 200 Volt 3-Phase 1775 RPM Motor with taco 1175 GPM Pump with ABB Drive, Approx 75"x26"x34" |
| 5. | Deutz-Allis Model 385 4-Row Planter with Plates, Drive Fertilizer, Pin Hitch, S/N: 1975. |
| 6. | Kennedy 7-Drawer Metal Tool Chest. 20 1/4"x8 5/8"x13 3/4" |
| 7. | Sioux Valve Grinding Machine. S/n: D16713. Approx 36"x21"x57" Kanga Machinery Movers has quoted $50 for a basic lift and load of this item on Tuesday December 22nd. Please contact Jack upon the completion of the auction to make arrangements 701-899-0543. |
| 8. | Loftness Model 961BFS Front Mount Snow Blower. 96" Cut, 2-Stage, PTO Driven, Hydraulic Chute Directional Control, 180 Degree PTO Extension Unit, S/N: H-01-91 |
| 9. | Cummins 6-Cylinder Diesel Engine with Radiator. Approx 38"x73"x62" Kanga Machinery Movers has quoted $175 for a basic lift and load of this item on Tuesday December 22nd. Please contact Jack upon the completion of the auction to make arrangements 701-899-0543. |
| 10. | 2005 CML Model SB48 Rotary Draw Tube and Pipe Bending Machine 2" Bending Capacity, 180 Degree Maximum Bending Angle, Remote Foot Switch, Assorted Dies, 110 Volt, S/N: 4905039. Note: Need new encoding card. |
| 11. | Scotchman Model GNDDE Pipe Notcher. 30 to 90 Degree Adjustable Angle, 2.5" Max Notch at 90 Degrees, 2" Max Notch at 45 Degrees, 1 1/2" Max Notch at 30 Degrees, 2950 SFPM Belt Speed, 3"x78 3/4" Belt, Dust Extractor, 5HP 230 Volt 3-Phase Motor and Controls, S/N: 0328035. |
| 12. | Kennedy 7-Drawer Metal Tool Chest. 20 1/4"x8 5/8"x13 3/4" |
| 13. | Esab Model Silhouette 1000-4 Plasma Cutter. 48"x144" Cutting Area, 48"x48" Tracing Area, (1) Torch, Model ESP-50 Power Unit, 50 Amp, 100 Volt Rated Output @ 100% Duty Cycle, 208/230 Volt Single or Three Phase, S/n: PC-J603002. Note: Needs new main board. |
| 14. | Wilton 4 1/2" Bench Vise with Swivel Base. |
| 15. | 1992 Mercury Model 50ELPTO 50HP Outboard Motor. 28" From Transom to Center of Shaft, S/N: ODO89446 Note: Purchased new and used for demonstration purposes only. Never disassembled or put in the water. |
| 16. | ADP Model RL-620 Dental Air Compressor. 100 psi Operating Pressure, 120 psi Relief Pressure, 30-Gallon Hoizontal Receiver Tank, Copelametic Model KAT4-0100-CABN Pumps, 230 Volt Single Phase Electrics, S/n: AL62D-900706-001. Approx 45"x26"x34" |
| 17. | (2) 40-Compartment Pigeon Hole Cabinets. 35 3/8"x12"x21 1/2" Each. |
| 18. | Kennedy 7-Drawer Metal Tool Chest. 20 1/4"x8 5/8"x13 3/4" |
| 19. | Trimble Geo Explorer 3 GPS Receiver with Chager and Case. |
| 20. | (2) Mac Tools model KS6225 Battery Boosters. 1000 Peak Amps, 250 Cranking Amps, 12-Volt. |
| 21. | (2) Electic Motos for Repair: (1) GE Model KE286AC205B, 30HP 230/460 Volt 3-Phase, 4 1/2"x2" Shaft; (1) Re Ronk, 30HP 240 Volt, 5"x2" Shaft, S/N: 402-131. |
| 22. | (4) Metal Frame Laminated Wood Top Table: (1) 30"x30"x28 1/4" with lower shelf on wheels, (1) 71 5/8"x29 5/8"x29 1/4"; (1) 35 1/8"x20 1/8"x30 7/8" with lower shelf and (1) 36"x30"x26 3/4" |
| 23. | (2) Locker Sections with (4) Lockers Each. 24"x60"x24" per Locker with Assorted Wall Brackets. |
| 24. | Kennedy 7-Drawer Metal Tool Chest. 20 1/4"x8 5/8"x13 3/4" |
| 25. | 1993 Johnson Model J50TLETB 50HP Outboard Motor. Approx 27" From Transom to Center of Shaft, S/N: G-032699-12. Note: Purchased new and used for demonstration purposes only. Never disassembled or put in the water. |
| 26. | Nu-Vu Model OP-2LFM Double Oven. 550 Degree Farenheit Max Temp, 60 Minute Timer, 120/240 Volt Single Phase Electrics, S/N: 121-5762. Approx 35"x22 1/8"x77 1/4" Note: Needs Repair. |
| 27. | (3) Metal Frame Laminated Wood Top Tables: (1) 42 1/4"x28"x34 3/4"; (1) 59 5/8"x23 5/8"x30" and (1) 60"x24"x29" |
| 28. | Greenfield metric Tap, Die and Drill Set. Incomplete, with Metal Case. |
| 29. | Wilton 4 1/2" Bench Vise. |
| 30. | International Rough Terrain Fork Truck. Estimated 5,000 lb. Capacity, 169" Lift, Single Speed Manual Transmission, Side Shift, 5"x48" Forks, Pneumatic Tires, Diesel Engine, S/N: na. Video Available! Click on lot to view. |
| 31. | Kennedy 7-Drawer Metal Tool Chest. 20 1/4"x8 5/8"x13 3/4" |
| 32. | Travenol Model 2M8015 Infusion Pump. 115 Volt, S/N: 11025059. |
| 33. | Pallet of assorted outboard motor parts and more. Note: Gray piece of metal not included. |
| 34. | Lincoln Model PowerWave 450 Welding Power Source. 450 Amp 38 Volt Rated Output @ 100% Duty Cycle, 200/230/460 Volt 3-Phase Input, S/N: U1971004499. Approx 20"x35"x36" |
| 35. | John Deere 4-Cylinder Gasoline Engine. Kanga Machinery Movers has quoted $75 for a basic lift and load of this item on Tuesday December 22nd. Please contact Jack upon the completion of the auction to make arrangements 701-899-0543. |
| 36. | Kennedy 7-Drawer Metal Tool Chest. 20 1/4"x8 5/8"x13 3/4" |
| 37. | Hydraulic Power Unit with 5HP 208-230/460 Volt 3-Phase Motor. 32"x22"x40" |
| 38. | Cummins 6-Cylinder Diesel Engine. Appox 29"x68"x74" Kanga Machinery Movers has quoted $150 for a basic lift and load of this item on Tuesday December 22nd. Please contact Jack upon the completion of the auction to make arrangements 701-899-0543. |
| 39. | (2) Screw Jacks: (1) 29" Tall with Closed and (1) 21 1/2" When Closed. |
| 40. | (3) Boxes of assorted puller parts and more. |
| 41. | (2) Electrical Testers. |
| 42. | Kennedy 7-Drawer Metal Tool Chest. 20 1/4"x8 5/8"x13 3/4" |
| 43. | Snap-On Model LT3U 3/8" Drive Cordless Impact Wrench. 9.6 Volt, With (2) Batteries and (2) Chargers. |
| 44. | Yuasa Model Y1025 Automatic Motorcycle Battery Load Tester, S/N: 03168983 and Yuasa Model Y1012 Automatic Motorcycle Battery Charger, S/N: 02208061. |
| 45. | Clausing-Metosa Model C1440 Engine Lathe. 14"x40" Rated Capacity, 14.17" Actual Swing over Bed, 8" Swing Over Cross Slide, 40" Between Centers, 1.65" Hole Thru Spindle, (18) Spindle Speeds: 30 to 2,000 RPM, Standard and Metric Threading, D1-5 Spindle Nose, Steady Rest, Change Gears, Chip Pan, 3HP 3-Phase Motor and Controls, S/N: 22117. Approx 80"x36"x51" and 2,500 lbs. Kanga Machinery Movers has quoted $375 for a basic lift and load of this item on Tuesday December 22nd. Please contact Jack upon the completion of the auction to make arrangements 701-899-0543. |
| 46. | Snap-On Inteface System with Tachometer, Volt/Ohm and Volt/Amp Meters, In Plastic Case. |
| 47. | Snap-On Tool box with assorted tools including: Makita Cordless Drill, Hammers, Torque Wrenches, Brake Hone, Puller, Tap Handle and More. |
| 48. | Kennedy 7-Drawer Metal Tool Chest. 20 1/4"x8 5/8"x13 3/4" |
| 49. | 4-Cylinder Gasoline Engine. Kanga Machinery Movers has quoted $75 for a basic lift and load of this item on Tuesday December 22nd. Please contact Jack upon the completion of the auction to make arrangements 701-899-0543. |
| 50. | Boekel Cat No. 107801 Soil Sample Dryer 1500 Watt, (3) Shelves, Over (100) Sample Containers, S/N: 00328. |
| 51. | Approx (7) Assorted Tool Boxes. |
| 52. | (4) Tru Temper 30" Wooden Handles |
| 53. | (2) 12" Rotary Venting Hoods and (1) Root-Lowell Model 1033 Rotary Duster. |
| 54. | Kennedy 7-Drawer Metal Tool Chest. 20 1/4"x8 5/8"x13 3/4" |
| 55. | 4-Spool Hydraulic Valve. |
| 56. | (5) Water Pumps for Cummins Diesel. Marvellum MIL-B-121-C, Stamped "MPUSA" |
| 57. | Assorted Irrigation System Components Including: 1" to 2" connectors Elbows, Extensions, Approx (20) Sprinkler Heads, 4" Quick Connect Couplers, Gaskets, Compression Joint, 8" General Rain connections, 6" Straight, Reducers and Expanders and More. |
| 58. | Berkley Model B3ERBL Centrifugal Pump with Baldor 15HP Motor and (1) Deming Co Centrifugal Pump |
| 59. | Large Assortment of V-Belts. Mostly Gates and Good Year. |
| 60. | International Cub Tractor. 8.89 Drawbar Horsepower, 9.76 Belt Horsepower, (3) Speed Transmission, 4-Cylinder Gasoline Engine, S/N: 239334. |
| 61. | Kennedy 7-Drawer Metal Tool Chest. 20 1/4"x8 5/8"x13 3/4" |
| 62. | (2) Dyna Electric Motors. |
| 63. | (3) Metering Pumps: (1) Cheminjector Model CF040614-0905 with Baldor 208-230/460 Volt 3-Phase Motor; (1) Pump with Motor and (1) Pump Only. |
| 64. | Assorted Electric Meter Parts Including: (3) Meter Box Housings, And Approx (27) Watt Hour Meters. |
| 65. | Assorted Irrigation Components Including: Mostly 3" Quick Connect Elbows and Straights some with valves attached, Approx (25) 4' Sprinkler Risers, Approx (50) 2' Sprinkler Risers, Approx (50) 6' Sprinkler Risers, Appox (20) Sure Flo 6" Couplers, Berkley 4" Valve, and (7) Aquamatic Control Valves. |
| 66. | Kennedy 7-Drawer Metal Tool Chest. 20 1/4"x8 5/8"x13 3/4" |
| 67. | Assortment of Wooden Stakes, (2) Partial Rolls of Clear Plastic, (1) Partial Roll of 36" Tar Paper and (4) Sonotube Z-Are Concrete Forms. |
| 68. | (5) Metal Frame shelves: (4) 48"x29 3/4"x52" on Casters with Wire Mesh Shelves; (1) 48"x23 1/4"x43" with (3) Wood Shelves. |
| 69. | (2) Hydraulic Power Units with Assorted Hydraulic Test Equipment. |
| 70. | (2) International Harvester Model Cub 144 Adjustable Depth Cultivators. |
| 71. | Cub Model L-38 4' Disc. Adjustable Angle, For Cub Tractor. |
| 72. | Kennedy 7-Drawer Metal Tool Chest. 20 1/4"x8 5/8"x13 3/4" |
| 73. | Johnson Model 400-JH Air Compressor. 30-Gallon Hoizontal Receiver Tank, No Motor, Approx 37"x16"x38" |
| 74. | (3) Oily Rag Cans |
| 75. | Gehl Model SL5635 Skid Steer Loader. 1800 lb. Operating Capacity, Turbo Diesel Engine, Auxilliary Hydraulics, 72" Utility Bucket, Enclosed Cab with Heat, 2,517 Indicated Hours, S/N: 14128. Video Available! Click on lot to view. |
| 76. | Den-Tal-EZ Model MC-202 Dental Vacuum with (2) Vacuum Pumps, 2HP 230 Volt Single Phase, S/n: W0398. |
| 77. | 50HP 200 Volt 3-Phase 1775 RPM Motor with taco 1175 GPM Pump with ABB Drive, Approx 75"x26"x34" |
| 78. | Kennedy 7-Drawer Metal Tool Chest. 20 1/4"x8 5/8"x13 3/4" |
| 79. | Cincinnati Model 113 Double End Bench Grinder with Pedestal. 2"x10" Wheel Capacity, 2HP 1750 RPM 220/440 Volt 3-Phase Motor, S/N: 96362. Approx 32"x26"x50" |
| 80. | Honda 10HP Outboard Motor. Tiller Style, 4-Cycle Engine, Prop and Gas Tank, S/N: B100S1500176. |
| 81. | (3) Pallets of assorted ceramic tile and grout. |
| 82. | Reddy Heater 150,000 BTU Torpedo Heater on Wheels with Fuel. Kerosene Fired, 110 Volt, S/N: na. |
| 83. | Assorted Pulleys, U-Joints, Recoils, Delco-Remy Alternator, Hardware, (7) HID Fixtures with Ballast and More. |
| 84. | Kennedy 7-Drawer Metal Tool Chest. 20 1/4"x8 5/8"x13 3/4" |
| 85. | (3) Electric Motors: (1) New Baldor Super E 5HP 230/460 Volt 3-Phase; (1) Dayton Model 5K675K 3HP 115-208/230 Volt and (1) US Electrical Holloshaft 15HP 3-Phase 1800 RPM. |
| 86. | Tractor Mount Tree Row Weeder with Hydraulic Tank and Valves. |
| 87. | Versatile Front Mount for Tractor 3-Point. Approx 3' Wide, 3 1/2' tall with Hydraulic Valve. |
| 88. | (2) Humidcell Air Units. Used in Greenhouse, 1/2HP 115 Volt Motor. |
| 89. | (2) Laerdal Little Annie CPR Manequins with Disposable Airway Bags and Carrying Bags. |
| 90. | Towmotor Model LT56RS Fork Truck. Gasoline Powered, 6,000 lb. Rated Capacity, Estimated 60" Lift, Cushion Tires, 6"x40" Forks, Cage, S/N: M-5656215. Note: New Starter Installed. Truck now operational. Kanga Machinery Movers has quoted $250 for a basic lift and load of this item on Tuesday December 22nd. Please contact Jack upon the completion of the auction to make arrangements 701-899-0543. |
| 91. | Kennedy 7-Drawer Metal Tool Chest. 20 1/4"x8 5/8"x13 3/4" |
| 92. | Oak Veneer Hutch with (4) Doors and Upper Shelf, On Wheels, 58"x32 1/4"x82" |
| 93. | (6) Sections of Republic Storage System Co. Model Safe-O-Mat Metal Lockers. Each Locker is approx 12"x19 1/2"x12"; (3) Sections 72"x60"x12"; (2) Sections 84 /4"x60"x12" and (1) Section 60"x60"x12" with Assorted Mounting Brackets. |
| 94. | (2) Laminated Wood Top metal Frame Folding Tables. 60" Diamter with Laminated Wood Shelf, 60 1/8"x15 1/8"x48" |
| 95. | Double Pedestal Metal Desk with Laminated Top and (6) Drawers. |
| 96. | Kennedy 7-Drawer Metal Tool Chest. 20 1/4"x8 5/8"x13 3/4" |
| 97. | (3) Assorted Tables: (1) 24"x28"x26 3/4" ; (1) 36"x36"x29 1/2" and (1) 36"x18 1/4"x26" |
| 98. | (14) Assorted Laminated Wood Top Cubicle Desk Tops: (2) 47"x42"x1"; (6) 46 1/2"x28 1/4"x1 1/4" and (6) Corne Style 42"x42"x1 1/2" |
| 99. | Precision Scientific Cat No. W79 Soil Sample Dryer. 260 Degree Celsius Maximum Temperature, 115 Volt, 3900 Watt, 34 Amp Single Phase Electrics, S/N: 625-1072. Approx 48 1/2"x26 1/2"x32 1/2" |
| 100. | (2) Laerdal Resusci junior Manaquins with Resusci mannikin Faces and Hard Plastic Carrying Cases. |
| 101. | Rockwell Model 500HD 4" Belt Sander with Dust Bag. 110 Volt S/N: 29037. |
| 102. | Kennedy 7-Drawer Metal Tool Chest. 20 1/4"x8 5/8"x13 3/4" |
| 103. | Tennant Model 240 Power Sweeper. 48" Swath, Kohler Gasoline Engine, S/N: 1667. Kanga Machinery Movers has quoted $175 for a basic lift and load of this item on Tuesday December 22nd. Please contact Jack upon the completion of the auction to make arrangements 701-899-0543. |
| 104. | FMC Model L0913B Pump. 10GPM, 1200 psi, S/N: A331650. |
| 105. | Farmall Model 504 Farm Tractor. 40HP @ Drawbar, 45HP @ PTO, 4 Cylinder Gasoline Engine, 3-Point Hitch, 540 RPM PTO, Power Steering, S/N: 6790 S-Y-FF Video Available! Click on lot to view. |
| 106. | (8) Light Poles. 30' Long, with (7) Light Heads, Some with Glass Covers. Note: (2) Not Pictured |
| 107. | (2) Armstrong Industries Cat. No. AA-2120 Rususci Baby Manequins with Disposable Airways and Hard Plastic Carrying Cases. |
| 108. | Kennedy 7-Drawer Metal Tool Chest. 20 1/4"x8 5/8"x13 3/4" |
| 109. | (4) Steel Television Hanging Brackets. 21"x8 1/2"x20 1/2" Each. |
| 110. | US Luch Model A4 Vacuum Sanding System. 115 Volt, 24 amp, S/N: na. Approx 14 1/2"x36" Note: No Hoses. |
| 111. | Wissota Model F-105 Double End bench Grinder. 10" Max Wheel Diameter, 1HP 1725 RPM, 115/230 Volt Single Phase Motor, S/N: W0-71. |
| 112. | Sanborn Model M1098300-22 Air Compressor. 120 psi Max, 3HP 115 Volt Motor, S/N: I1440108. |
| 113. | (2) Metal frame Tables with Laminated Wood Tops: (1) 42"x29"x34 3/4" on Wheels; (1) 29 3/4"x29 3/4"x29 1/2" |
| 114. | Kennedy 7-Drawer Metal Tool Chest. 20 1/4"x8 5/8"x13 3/4" |
| 115. | (5) Rolling Nurse Carts with Open Side, 15"x30" Laminated Wood Top, Adjustable Height |
| 116. | (25) Metal Frame Chairs, 18" Seat Height. |
| 117. | (5) Rolling Nurse Carts: (4) With 4-Bin Attachment, Swivel Top, Adjustable Height, Approx 28"x35" Work Surface and (1) with Swivel Top, Adjustable Height. |
| 118. | (2) Rolling Nurse Carts with (2) Drawers and (4) Bins. (2) Working Surfaces: 11"x15" and 7"x11", Cart has Adjustable Height. |
| 119. | (8) Assorted Rolling Chairs. |
| 120. | Farmall Cub Tractor. 8.89 Drawbar Horsepower, 9.76 Belt Horsepower, (3) Speed Transmission, 4-Cylinder Gasoline Engine, S/N: na. Video Available! Click on lot to view. |
| 121. | (6) Stackable Chairs. (3) With Arm Rests. |
| 122. | (2) Chairs. |
| 123. | (3) File Cabinets: (2) 4-Drawer and (1) 3-Drawer Lateral. |
| 124. | Kennedy 7-Drawer Metal Tool Chest. 20 1/4"x8 5/8"x13 3/4" |
| 125. | (3) Assorted Tables: (1) 31 1/2"x31 1/2"x29 3/4"; (1) With Drop Sides 15"x36" and (1) 20"x33"X25" with Lower Shelf. |
| 126. | Kennedy 7-Drawer Metal Tool Chest. 20 1/4"x8 5/8"x13 3/4" |
| 127. | (11) 41 3/4" Round Tables with Flip up top. |
| 128. | Laminated Wood Hutch with (6) Doors and (2) fixed Shelves. 22"x101"x29 1/4" |
| 129. | Assorted Office Furniture: (1) 4-Drawer Lateral File Cabinet with Key 18 1/2"x42"x48 1/2"; (1) 2-Drawer Lateral file Cabinet 18"x36"x28"; (1) Plano 4-Tier Plastic Shelf 14"x34"x56 1/2" and (1) Magazine Rack with (5) Angled Shelves 16"x33"x63 1/2" |
| 130. | Pentax Model K1000SE 35mm SLR Camera Includes (1) SMC Pentax-A 1:2 50mm Lens; (1) Sigma Zoom 75-200mm with Macro, F-Stop; (1) Sigma UC Zoom 28-70mm, F-Stop (1) Haze 52mm UV Filter; (1) Haze 59mm UV Filter, and (1) Vivitar Auto 2600 Flash, All In Bag |
| 131. | Assorted AV Equipment Including (2) Kodak Slide Projectors without Carousels and (1) Pentax Program Plus Auto Focus 35mm Camera with SMC Pentax-A 1:1.7 50mm Lens and Bag. |
| 132. | Kennedy 7-Drawer Metal Tool Chest. 20 1/4"x8 5/8"x13 3/4" |
| 133. | Magellan GPS Trailblazer with Case and Manual. (3) AA Batteries Required. |
| 134. | 200-Gallon Sprayer. 30' Extended Length, (5) Spray Heads, Pin Hitch and (1) 9' Spray Shroud |
| 135. | 1994 Ford Taurus. 147,xxx Indicated Miles, 3.8L V-6 Engine, Automatic Transmission, Power Windows, Power Locks, Power Mirros, Air Conditioning, AM/FM Cassette, VIN: 1FALP5246RG162800. Note: $35 Processing fee will be added to the total. |
| 136. | 200-Gallon Sprayer with (5) Spray Heads and Pin Hitch. |
| 137. | 4-Panel Winged Dethatcher. 24' Total Length, Pin Hitch. |
| 138. | Spring Tooth Cultivator with Hydraulic Leveler, Pin Hitch. 12' Total Width. |
| 139. | Hiniker Econ-O-Till 4-Row, (8) Head Cultivator with Squibb-Pitzer Flo-Trol Attachment, 12' Total Width, 3-Point Hitch, S/n: EC12664. |
| 140. | Kennedy 7-Drawer Metal Tool Chest. 20 1/4"x8 5/8"x13 3/4" |
| 141. | KMC 5' Roto Tiller. PTO Drive, 3-Point Hitch |
| 142. | M&W Gear Co. Model 1921 12' Rotary Hoe. (35) Heads, (2) Wings, 24' Extended Width, 3-Point Hitch, S/N: 443 |
| 143. | Brittonya High Pressure Sprayer. 200 Gallon Tank, Hypo Model D60 PTO Driven Pump, 14.8 GPM 213 PSI, 540 RPM, 3-Point Hitch. |
| 144. | Approx (48) 11' Long Elbowed Piping. Threaded Ends, 1 1/4" |
| 145. | Western Spreader Tank. 8"x4"x28" Beveled Depth, Briggs & Stratton 8.5HP Engine, S/N: 3605. |
| 146. | ASA Lift Type T-200 2-Row Carrot Harvester. PTO Driven Hydraulic Pump with Park Valves, Pin Hitch, S/N: 19164. |
| 147. | Pro Gro Model 8Row30 Front Mount Sprayer. 20' Extended Width, (30) Nozzles, S/N: 08F19040Z |
| 148. | GE Model 5KC43MG2629X Garage Door Opener with Gear and Pulley Drive, Gear Release Lever, 38"x19"x16" Overall. |
| 149. | Assorted Chicken Wire and More. |
| 150. | 1990 Ford F350 Boom Truck. 71,5xx Indicated Miles, 7.3L International Diesel Engine, Automatic Transmission, Versalift Model TEL29EB1 Bucket Lift, 28.5' Max Platform Height, 300lb. Bucket Load, S/N: F190156, VIN: 1FDKF37M9LKB18148. Note: $35 Processing fee with be added to total. Note: Tow Away Vehicle. Engine Operational but needs new fuel tank. |
| 151. | Custom Sprayer. Walk Behind Type, (5) Spray Heads, CO2 Charge. |
| 152. | Pallet of AG Systems Single No Till Disk Fertilizer Openers with Mounting Attachment. |
| 153. | Pallet of Yetter Single No till Disk Fertilizer Openers with Disc and Mounting Attachment. |
| 154. | International Harvester Model 820 17.5' Bean Head. Auto Height, S/N: 148015U10406. |
| 155. | 2-Row Potato Planter. 3-Point Hitch, Adjustable Depth. Note: This item is located off the main campus and may become inaccessible due to winter weather. If the weather becomes a factor, removal of this item may take place in the spring, but must be paid for by the posted date. If the weather remains mild, removal must take place during posted date(s.) |
| 156. | Potato Unloader. Approx 150 Bushel Capacity, with Running Gear. Note: This item is located off the main campus and may become inaccessible due to winter weather. If the weather becomes a factor, removal of this item may take place in the spring, but must be paid for by the posted date. If the weather remains mild, removal must take place during posted date(s.) |
| 157. | 40' Belt Conveyor. Note: This item is located off the main campus and may become inaccessible due to winter weather. If the weather becomes a factor, removal of this item may take place in the spring, but must be paid for by the posted date. If the weather remains mild, removal must take place during posted date(s.) |
| 158. | Vegetable Wash Tub. Previously used for Carrots. Note: This item is located off the main campus and may become inaccessible due to winter weather. If the weather becomes a factor, removal of this item may take place in the spring, but must be paid for by the posted date. If the weather remains mild, removal must take place during posted date(s.) |
| 159. | Potato Unloader. Approx 150 Bushel Capacity. Note: No running gear. Note: This item is located off the main campus and may become inaccessible due to winter weather. If the weather becomes a factor, removal of this item may take place in the spring, but must be paid for by the posted date. If the weather remains mild, removal must take place during posted date(s.) |
| 160. | Wade Rain Model 70SH7175 Poweroll Hydrostatic Mover Unit with (8) Additional Wheels Note: This item is located off the main campus and may become inaccessible due to winter weather. If the weather becomes a factor, removal of this item may take place in the spring, but must be paid for by the posted date. If the weather remains mild, removal must take place during posted date(s.) |
| 161. | Assorted 2" 3" 4" and 6" Irrigation Pipe. Mostly Aluminum. Note: This item is located off the main campus and may become inaccessible due to winter weather. If the weather becomes a factor, removal of this item may take place in the spring, but must be paid for by the posted date. If the weather remains mild, removal must take place during posted date(s.) |
| 162. | Potato Unloader. Approx 150 Bushel Capacity. Note: No running gear. Note: This item is located off the main campus and may become inaccessible due to winter weather. If the weather becomes a factor, removal of this item may take place in the spring, but must be paid for by the posted date. If the weather remains mild, removal must take place during posted date(s.) |
| 163. | Vermeer Traveling Irrigation Unit with Nelson "Big Gun" Model 200, Pin Hitch. Note: No Gun Nozzle. Note: This item is located off the main campus and may become inaccessible due to winter weather. If the weather becomes a factor, removal of this item may take place in the spring, but must be paid for by the posted date. If the weather remains mild, removal must take place during posted date(s.) |
| 164. | (3) Sprinkler Risers. Note: This item is located off the main campus and may become inaccessible due to winter weather. If the weather becomes a factor, removal of this item may take place in the spring, but must be paid for by the posted date. If the weather remains mild, removal must take place during posted date(s.) |
| 165. | 275' Single tower Water Drive Irrigation System. Steel Wheels, Towable. Note: This item is located off the main campus and may become inaccessible due to winter weather. If the weather becomes a factor, removal of this item may take place in the spring, but must be paid for by the posted date. If the weather remains mild, removal must take place during posted date(s.) |
| 166. | Mobile Home Hitch Lift. Complete with Hydraulic Cylinder and Pumpp |