| Item |
Photo (Off) |
Description |
Bids |
High
Bidder |
Current
Amount |
Next Bid
Required |
Your
Bid |
Your
Maximum |
| 9 |
 | Deckel Model SO Single Lip Tool Grinder, 5/8” Collet Capacity, 4” Cup Wheel Diameter, 4500 RPM, Collets, Bench Model, 110 Volt Motor, S/N: 95-25845 |
21 |
22859 |
2,300.00 |
|
ended |
| 10 |
 | Do-All Model C-916 Horizontal Band Saw. 9"x16" Capacity in Rectangles, 10 3/4" Maximum Round Capacity, 1" Blade Width, Variable Blade Speeds: 105 to 275 FPM, 2HP 208-230/460 Volt 3-Phase Motor and Controls, S/N: 438-85239. Approx 84"x24"x54" Dan Castonguay has quoted $100 for a basic lift and load of this machine during scheduled removal days. Please contact Dan with rigging related questions at 612-803-4350. |
18 |
17422 |
530.00 |
|
ended |
| 20 |
 | Clausing Gang Drill. 60"x20" Plain Production Table, 7" Throat, (3) Clausing Drill Press Heads as Follows: (1) Model 1687, Variable Speed 330 to 2640 RPM, MT Spindle, s/n: 117783; (1) Model 1668, Varialbe Speed: 400 to 4,000 RPM, MT Spindle, s/n: 15535570; (1) Model 1668, Variable Speed: 400 to 4,000 RPM, MT Spindle, s/n: 517665, All with 3/4HP 208-220/440 Volt 3-Phase Motors. Approx 65"x34"x73" and 1,200 lbs. Dan Castonguay has quoted $100 for a basic lift and load of this machine during scheduled removal days. Please contact Dan with rigging related questions at 612-803-4350. |
14 |
22601 |
400.00 |
|
ended |
| 30 |
 | Bertolette Model 315 Tube Cut-Off Machine. 1/8" to 1 3/4" O.D.x.065" Wall Rated Capacity Without Using Rotary Cut and Pull Attachment, 36" Max Feed Length per Stroke, 1HP 208-220/440 Volt 3-Phase Motor and Controls, S/N: 315237. Approx 77"x20"x48" Dan Castonguay has quoted $75 for a basic lift and load of this machine during scheduled removal days. Please contact Dan with rigging related questions at 612-803-4350. |
10 |
12523 |
210.00 |
|
ended |
| 50 |
 | Nichols "Twin Mill" Duplex Production Mill. 10"x30" T-Slotted Table, 14 3/4" Table travel, 11 3/4" cutting Stroke, 9 3/4" Vertical Adjustment of Heads, 4" to 16" Distance Between Spoindles, (15) spindle Speeds: 55 to 2050 RPM, 40-Taper Spindles, (2) 2HP 208/220/440 Volt 3-Phase Motors, S/N: TM-319. Approx 52"x54"x59" Dan Castonguay has quoted $100 for a basic lift and load of this machine during scheduled removal days. Please contact Dan with rigging related questions at 612-803-4350. |
8 |
22708 |
200.00 |
|
ended |
| 70 |
 | Worthington Reciprocating Type Air Compressor. Approx 66 CFM, 2-Stage Pump, Approx 120-Gallon Horizontal Receiver Tank, 15HP 3-Phase Motor, S/N: na. Approx 70"x36"x63" Dan Castonguay has quoted $100 for a basic lift and load of this machine during scheduled removal days. Please contact Dan with rigging related questions at 612-803-4350. |
12 |
1301 |
100.00 |
|
ended |
| 75A |
 | Acme Gridley Model RB-6 Multiple Spindle Screw Machine, 2-5/8" capacity, 6 spindles, 6th position stock stop, Collet Capacity: 2-5/8" Round, 1-27/32" Square, and 2-17/64" Hexagon, Set of Master Collets, 9" Maximum Stock Feed Length, 8" Maximum Turning Length, Spindle Speeds: 101-1065 RPM, 40 HP, universal style chip conveyor, stock stand and reel, splash guards, flat style end slide, Serial Number 84955-A (New 1978.) Approx 24'x72"x107" and 31,000 lbs. R&R Machinery Moving has quoted $800 for a basic lift and load of this machine. A discount will apply if two or more screw machines are purchased by the same bidder and loaded at the same time. Please call Brian with rigging related questions. 612-770-2598. |
16 |
22158 |
1,450.00 |
|
ended |
| 90 |
 | Quincy Model QT5F-40 Air Compressor. Reciprocating Type, Approx 22 CFM, Approx 120 Gallon Vertical Receiver Tank, 5HP 230/460 Volt 3-Phase Motor, S/N: AT4007623. Approx 27"x24"x71" Dan Castonguay has quoted $75 for a basic lift and load of this machine during scheduled removal days. Please contact Dan with rigging related questions at 612-803-4350. |
9 |
21603 |
412.00 |
|
ended |
| 98 |
 | Westhoff Type Ultrasensitive Drill. 9"x8 1/2" T-Slotted Table, 8" Longitudinal Table Travel, 4" Vertical Head Adjustment, 12" Horizontal Spindle Adjustment, Variable Spindle Speed, Albrecht Keyless Chuck 0-1/8" Capacity, 110 Volt. |
12 |
1216 |
245.00 |
|
ended |
| 120 |
 | Do-All Model 10 Tool and Cutter Grinder. 5 5/16"x37 1/2" T-Slotted Table, 10" Swing Over Table, 27" Between Centers, 14" Between Tailstock and Work Head, 16" Longitudinal Table Travel, 10" Cross Table Travel, 10" Vertical Adjustment of Wheel Head, 180 Degree Swivel Angle, (3) Grinding Wheel Speeds: 2600, 3700, and 6200 RPM, 3-Phase Motor and Controls, S/N: 3203. Approx 53"x48"x53" and 1,100 lbs. Dan Castonguay has quoted $100 for a basic lift and load of this machine during scheduled removal days. Please contact Dan with rigging related questions at 612-803-4350. |
8 |
16142 |
310.00 |
|
ended |
| 125A |
 | Acme Gridley Model RB-6 Multiple Spindle Screw Machine, 2-5/8" capacity, 6 spindles, 6th position stock stop, Collet Capacity: 2-5/8" Round, 1-27/32" Square, and 2-17/64" Hexagon, Set of Master Collets, 9" Maximum Stock Feed Length, 8" Maximum Turning Length, Spindle Speeds: 101-1065 RPM, 40 HP, Logan Air Clutch, Universal Style Chip Conveyor, stock stand and reel, splash guards, flat style end slide, Serial Number 84948-A. (New 1978.) Approx 24'x71"x112" and 31,000 lbs. R&R Machinery Moving has quoted $800 for a basic lift and load of this machine. A discount will apply if two or more screw machines are purchased by the same bidder and loaded at the same time. Please call Brian with rigging related questions. 612-770-2598. |
16 |
8959 |
1,700.00 |
|
ended |
| 140 |
 | Hardinge Model DSM-A Automatic Second Operation Lathe. 9" Swing Over Bed, 1 1/16" Round Bar Capacity, 8" Between Spindle Nose and Turret Face, (12) Spindle Speeds: 250 to 4,200 RPM, 6-Position Turrett with 5/8" Holes, Pneumatic 5C Collet Closer, Vertical Cutoff Attachment, Worklight, Chip Guard, 4.1HP 220 Volt 3-Phase Motor and Controls, S/N: DSM-A-5C-568. Approx 81"x48"x85 and 2,700 lbs. Video Available!. Click on lot to view. Dan Castonguay has quoted $100 for a basic lift and load of this machine during scheduled removal days. Please contact Dan with rigging related questions at 612-803-4350. |
24 |
22864 |
2,900.00 |
|
ended |
| 150 |
 | Ridgid Model 535 Threading Machine. 1/8" to 2" Pipe Capacity, 1/4" to 2" Bolt Capacity, Speed Chuck, Reamer, Wheel Type Cutter, Rear Centering Device, 36 RPM, Remote Foot Switch, Rolling Stand, 110 Volt, S/N: 372557. |
20 |
20637 |
625.00 |
|
ended |
| 170 |
 | AEM Model CS-360MDDM Multi Directional Deburring Machine. 36" Width Capacity, Variable Speed on Table: 10-50 FPM, Digital Thickness Meter, Filtration System, 15HP 208-230/460 3-Phase Motor, S/N: 5612. Approx Dan Castonguay has quoted $100 for a basic lift and load of this machine during scheduled removal days. Please contact Dan with rigging related questions at 612-803-4350. |
9 |
22842 |
190.99 |
|
ended |
| 175A |
 | Acme Gridley Model RB-6 Multiple Spindle Screw Machine, 2-5/8" capacity, 6 spindles, 6th position stock stop, Collet Capacity: 2-5/8" Round, 1-27/32" Square, and 2-17/64" Hexagon, Set of Master Collets, 9" Maximum Stock Feed Length, 8" Maximum Turning Length, Spindle Speeds: 101-1065 RPM, 40 HP, Logan Air Clutch, universal style chip conveyor, stock stand and reel, splash guards, flat style end slide, chip pan, Serial Number 84947-A (New 1977.) Aprox 24'x72"x100" and 31,000 lbs. R&R Machinery Moving has quoted $800 for a basic lift and load of this machine. A discount will apply if two or more screw machines are purchased by the same bidder and loaded at the same time. Please call Brian with rigging related questions. 612-770-2598. |
15 |
20950 |
2,000.00 |
|
ended |
| 180 |
 | Oliver Drill Grinder. 7" 2-Jaw Chuck, 9" Wheel Diameter, 1HP 220 Volt 3-Phase Motor and Controls, S/N: F4494V. Approx 45"x30"x53" Dan Castonguay has quoted $75 for a basic lift and load of this machine during scheduled removal days. Please contact Dan with rigging related questions at 612-803-4350. |
17 |
6114 |
310.00 |
|
ended |
| 182 |
 | Burgmaster Model 2-BR Turret Drill. 36"x24" Table, Approx 30" Maximum Throat, 6-Station Turrett with Morse Taper Spindles, S/N: 20806. Approx 36"x85"x87" Dan Castonguay has quoted $150 for a basic lift and load of this machine during scheduled removal days. Please contact Dan with rigging related questions at 612-803-4350. |
6 |
22601 |
80.99 |
|
ended |
| 200 |
 | Bullard Model “Maximill” Vertical Boring Mill, 50” 4-Jaw Chuck, 56 ˝” Maximum Swing, 48” Maximum Under Rail, 2-Swivel Ram Type Heads, 12 Table Speeds: 5 to 72 RPM, 6 Power Head Feeds: .0018 to .500, Will Cut 15 Threads: 2 to 18 TPI, 15 HP Main Motor & Controls, Serial No. 10987, Note: Machine does NOT require a pit, Approx: Weight 18000 LBS and 134" x 116" x 123" Location: 3300 Ball Street, Birmingham AL 25234. Osborne Machinery Movers has quoted $350 for a basic lift and load of this item. Please call Jeff with rigging related questions @ 205.591.0496. |
12 |
17617 |
2,050.00 |
|
ended |
| 205 |
 | JF Berns Model 76-JB-3 Bar Chamfering Machine. 3" Round, 2.625" Hex, 2" Square Bar Capacities, 360 RPM, 10" 3-Jaw Chuck, Adjustable Height Stand, 208-230/460 Volt 3-Phase Motor, S/N: 76-3-341. Approx 38"x27"x47" and 500 lbs. Dan Castonguay has quoted $75 for a basic lift and load of this machine during scheduled removal days. Please contact Dan with rigging related questions at 612-803-4350. |
13 |
14583 |
1,450.00 |
|
ended |
| 210 |
 | Pexto Model G172C Power Shear. Mechanical Type, 6'x16Ga Capacity, Hand Operated Rear Back Gage, 20" Throat, Foot Treadle, 3HP 220/440 Volt 3-Phase Motor, s/n: F3354-4. Approx 102"X60"x69" and 3,200 lbs. Dan Castonguay has quoted $150 for a basic lift and load of this machine during scheduled removal days. Please contact Dan with rigging related questions at 612-803-4350. |
17 |
20637 |
472.00 |
|
ended |
| 211 |
 | V&O Press Co. Open Back Punch Press. Estimated 10-Ton Capacity, Approx 1" Stroke, 1" Ram Adjustment, 5" Max Daylight, 14"x6 1/2" Bed, 6"x5" Flanged Ram, 7 1/2" Opening in Back, Metal Stand, 1 1/2HP 208-220/440 Volt 3-Phase Motor, S/N: 45810-13. Approx 28"x37"x65" and 500 lbs. Dan Castonguay has quoted $100 for a basic lift and load of this machine during scheduled removal days. Please contact Dan with rigging related questions at 612-803-4350. |
29 |
20637 |
575.00 |
|
ended |
| 212 |
 | Lipe Model 125 Pneumatic Bar Feeder. 12'x1 1/16" Bar Capacity, S/N: 12388. |
10 |
22864 |
350.00 |
|
ended |
| 220 |
 | Bridgeport Twin Head Tracer Mill. 3-Dimensional Machine, 9"x48" T-Slotted Table, 30" Longitudinal Table Travel, 12" Cross Table Travel, 13" Knee Adjustment, SyncroTrace II Controls with TruTrace Model 1053-01 with .004 Offset Tracing Head, Chrome Ways, 50" X 9" Milling Head Slide, Bijur one-shot lube system, (2) 2J 1-1/2 hp milling heads, R-8 Spindles, Variabe Speed 60 - 4200 RPM, Machine Can Also Be Run Manually. s/n 184205. Approx 67"x55"x84" (Machine) 31"x20"x32" (Hydraulic Unit) and 3,500 lbs. Dan Castonguay has quoted $150 for a basic lift and load of this machine during scheduled removal days. Please contact Dan with rigging related questions at 612-803-4350. |
11 |
8059 |
1,475.00 |
|
ended |
| 225A |
 | Acme Gridley Model RB-6 Multiple Spindle Screw Machine, 2-5/8" capacity, 6 spindles, 6th position stock stop, Collet Capacity: 2-5/8" Round, 1-27/32" Square, and 2-17/64" Hexagon, Set of Master Collets, 9" Maximum Stock Feed Length, 8" Maximum Turning Length, Spindle Speeds: 101-1065 RPM, 40 HP, Logan Air Clutch, universal style chip conveyor, stock stand and reel, splash guards, flat style end slide, chip pan, Serial Number 84936-A (New 1977.) Approx 24'x72"x112" and 31,000 lbs. R&R Machinery Moving has quoted $800 for a basic lift and load of this machine. A discount will apply if two or more screw machines are purchased by the same bidder and loaded at the same time. Please call Brian with rigging related questions. 612-770-2598. |
24 |
21868 |
1,650.99 |
|
ended |
| 260 |
 | Single Spindle Boring Machine. 17" Throat, 31"x48" T-Slotted Table, 12" Max Under Spindle, 4" Quill Travel, Collet Style Spindle Nose with 3/4" Capacity Collet, 3/4HP 220/440 Volt 3-Phase Motor, s/n: na. Approx 53"x48"x99" and 3,000 lbs. Dan Castonguay has quoted $100 for a basic lift and load of this machine during scheduled removal days. Please contact Dan with rigging related questions at 612-803-4350. |
7 |
14161 |
210.00 |
|
ended |
| 300 |
 | Jet Model JMD-18 Milling and Drilling Machine. 9 1/2"x31 3/2" T-Slotted Table, 7" Throat, 24" Longitudinal Table Travel, 7" Cross Table Travel, 5" Quill Travel, (12) Belted speeds: 150 to 2,500 RPM, R8 Spindle Taper, Operator's Manual, 2HP 230 Volt Single Phase Motor and Controls, s/n: 8101132. Approx 47"x42"x72" and 650 lbs. Dan Castonguay has quoted $100 for a basic lift and load of this machine during scheduled removal days. Please contact Dan with rigging related questions at 612-803-4350. |
12 |
22787 |
650.00 |
|
ended |
| 320 |
 | Deckel Model GK21 Pantograph. Three Dimensional Machine, 1:10 Minimum Copy Ratio, 1: 1 1/2 Maximum Copy Ration, 7 3/4"x13 1/4" Cutting Table, 14" Maximum Height of Work, 6" Longitudinal Travel of Table, 12" Cross Travel of Table, 17 3/4"x12 3/4" Copy Table, 475 to 20,000 RPM Spindle, Assorted Tooling, s/n: 7610. Approx 40"x42"x57" |
11 |
16142 |
1,551.00 |
|
ended |
| 356 |
 | Avey Size 1/2 Heavy, 4-Spindle Drill Bank, 39" x 12" Plain Production Table, 6" Throat, 4-Spindle Speeds: 800 to 8,000 RPM, 1/2" Drill Chucks, Coolant Pump, Adjustable Height Table, Three Phase, s/n 31394 Dan Castonguay has quoted $75 for a basic lift and load of this machine during scheduled removal days. Please contact Dan with rigging related questions at 612-803-4350. |
9 |
22601 |
171.00 |
|
ended |
| 359 |
 | 3-Spindle Gang Drill. 77"x23 1/2" Plain Production, (1) Walker Turner Head with 7 1/2" Throat and (4) Belted Speeds; (1) Rockwell Head with 7 1/2" Throat and (6) Belted Speeds; (1) Clausing Head with 10" Throat Variable Speed 300-2000 RPM and Commander Multi Drill Attachment. Approx 84"x40"x104" adn 2,500 lbs. Dan Castonguay has quoted $100 for a basic lift and load of this machine during scheduled removal days. Please contact Dan with rigging related questions at 612-803-4350. |
13 |
6114 |
151.00 |
|
ended |
| 360 |
 | GA Gray Tracing Mill. Planer Mill Type, 18"x48" T-Slotted Table with 22"x48" Aluminum Tooling Plate, 24" Horizontal Head Travel, 18" Manual Vertical Adjustmen of Bridge, (8) Belted Speeds, Rose Brook Model 2000 2-D Tracing Head, Hydarulic Power Uni, 1 1/2HP 3-Phase Motor, s/n: na. Approx 78"x128"x81" (Machine) 32"x30"x39" (Hydraulic Unit) 3,400 lbs. Dan Castonguay has quoted $150 for a basic lift and load of this machine during scheduled removal days. Please contact Dan with rigging related questions at 612-803-4350. |
9 |
22158 |
200.99 |
|
ended |
| 375 |
 | Bridgeport Model 1J Vertical Milling Machine. 9"x42" T-Slotted Table, 24" Longitudinal Table Travel, 12" Cross Table Traveo, 13" Vertical Knee Adjustment, 5" Quill Travel, R8 Spindle Taper, (8) Belted Speeds: 80 to 2720 RPM, 1HP 220/440 Volt 3-Phase Motor and Controls, s/n: 70762. Approx 60"x54"x78" and 2,300 lbs. Dan Castonguay has quoted $100 for a basic lift and load of this machine during scheduled removal days. Please contact Dan with rigging related questions at 612-803-4350. |
10 |
22856 |
1,000.00 |
|
ended |
